- power: 50W,
- tubes used: 4 × EL84, 2 × 12AX7,
- two channels: clean and distorted,
- volume control: clean channel, gain and volume controls – distorted channel,
- two separately controlled with a footswitch Gain1 and Gain2,
- separate tone control for both channels with separate switches for EQ mod (type Twin),
- the same tone control for both channels sharing the switch for EQ Mod (type Single),
- footswitch: changes channels and switches between Gain 1 and Gain 2,
- channel switching on relays,
- separate Bright switches for both channels,
- series effects loop with „true bypass" controlled by a footswitch (not included),
- Direct Out line level output with speaker simulation,
- speaker outputs: 4 Ω, 8 Ω, 16 Ω.
- Footswitch Channel / Gain.
- Cable connecting footswitch and amplifier ("stereo")
- Power supply cable.
- Owner's manual.
- Warranty.
AMPLIFIER FEATURES
WHAT IS IN THE SET
Page 5
Need help?
Do you have a question about the Alligator AD 5200 Single and is the answer not in the manual?
Questions and answers