Restoring The Hard Disk Contents Under Windows; The Notebook's Date Or Time Is Incorrect; The Notebook's Lcd Screen Remains Blank - Fujitsu LIFEBOOK AH532 Operating Manual

Troubleshooting and tips

Restoring the hard disk contents under Windows

Operatingsystem,restoring Harddisk:
You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities
CD/DVD" to reinstall the operating system.
The instructions are provided on the case of the Recovery CD.
During the reinstall process your personal files and any installed programs
will be deleted. We advise you to backup your files to an external hard
drive, or CD / DVD disk before you start.
► Switch the notebook on.
The following display briefly appears on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appears, press the function key
► Insert the "Windows Recovery CD" into the optical drive.
► Select CD-ROM and press the Enter key.
► Follow the instructions on the screen.
After the installation you must install all the drivers again. Some installed hardware
components will not be correctly supported until this has been done.
► Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically.
► Click on the Desk Update button.
► Select Automatic driver installation (Express) and click on Start installation.
► Follow the instructions on the screen.
► Restart your notebook when the driver installation is completed.

The notebook's date or time is incorrect

Timenotcorrect Buffer battery,load Dateisincorrect Incorrectdate/time Time,daylightsavings Summer time Timenotcorrect
Cause
Time and date are incorrect.
If the time and date are still set incorrectly after
switching on the notebook.

The notebook's LCD screen remains blank

LCDscreen LCDscreenistoodark Cause
Monitor is switched off.
External monitor or television set connected.
62
.
F12
Troubleshooting
► With the BIOS-Setup-Utility, you can set the
date and time in the main menu.
► Please contact your sales outlet or our
Hotline/Service Desk.
Troubleshooting
► Press a key or touch the touchpad.
► Press the key combination to switch the
screen output, see
Page 24.
"Key combinations",
Fujitsu