Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sure Slice SSG195S
Summary of Contents for Sure Slice SSG195S
- Page 1 SURE SLICE MEAT SLICER RANGE INSTALLETION USE AND MAINTENANCE MANUAL...
- Page 2 SURE SLICE – GRAVITY FEED SLICERS SSG195S SSG220S SSG250S SSG220T SSG250E SSG250T SSG275E SSG275T SSG300E SSG300L SSG300T SSG330T SSG350T NOTES FOR THE USER This manual consists of 28 pages as follows: Title page with notes for the user (back side not printed);...
- Page 3 SURE SLICE – GRAVITY FEED SLICERS...
-
Page 4: Table Of Contents
CONTENTS FOREWORD........................2 SCOPE OF THIS MANUAL..................2 GENERAL INFORMATION.................... 2 LIMITS OF USE – SAFETY NORMS ................. 2 GENERAL SAFETY REGULATIONS ................ 2 MANUFACTURER'S WARRANTY AND LIABILITY ..........3 PLATES – CONFORMITY MARKS................3 ENVIRONMENTAL CONDITIONS OF USE .............. 3 PACKING ........................ -
Page 5: Foreword
SURE SLICE – GRAVITY FEED SLICERS FOREWORD SCOPE OF THIS MANUAL This manual contains all the necessary information to install, use and service the gravity slicers for food (please see models in paragraph "Technical Description"). The scope of this document, hereinafter the "manual", is to permit users, and especially end users, to take all the cautions and provisions possible for using this machine safely and for a long time. -
Page 6: Manufacturer's Warranty And Liability
SURE SLICE – GRAVITY FEED SLICERS MANUFACTURER'S WARRANTY AND LIABILITY The manufacturer's warranty covering the good functioning of the machines and their compliance to the service for which they have been designed depends on the correct application of the instructions contained in this manual. -
Page 7: Packing
SURE SLICE – GRAVITY FEED SLICERS PACKING OPENING THE BOX On reception check packaging integrity, otherwise inform the forwarding agent or the area agent immediately. To unpack the machine, proceed as follows: Open the box and remove your copy of the manual of use and maintenance, then proceed according to the instructions found on that manual;... - Page 8 SURE SLICE – GRAVITY FEED SLICERS...
-
Page 9: Technical Description And Proposed Conditions Of Use
Start/stop button system requiring a voluntary restart of the machine in the case of an outage or interruption of the power supply. Safety micro-switch preventing the motor from starting when the blade guard is removed (not available on the SSG195S, SSG220S and SSG250S machines). WARNING: RESIDUAL RISKS... -
Page 10: Dimensions
SURE SLICE – GRAVITY FEED SLICERS DIMENSIONS SSG195S SSG220S SSG250S SSG220T SSG250E SSG250T SSG275E SSG275T SSG300E SSG300L SSG300T SSG330T SSG350T... -
Page 11: Main Technical Data
Built-in. Built-in. Built-in. Intermittent service (5 min. pause every 15-20 min. of work) only for SSG195S. All the other machines have a ventilated motor. Supply voltage: Please see data plate on the machine base All the values shown are approximate and not binding. The manufacturer reserves to improve the... -
Page 12: Supplied Literature And Accessories
SURE SLICE – GRAVITY FEED SLICERS SUPPLIED LITERATURE AND ACCESSORIES If not otherwise defined at the moment of order, the machines are supplied together with the following: EU conformity declaration Instructions manual for installation, use and maintenance. PRODUCTS THAT CAN BE SLICED All types of cold cuts (raw, cooked, smoked);... -
Page 13: Main Components I
SURE SLICE – GRAVITY FEED SLICERS MAIN COMPONENTS I SSG195S SSG220S SSG250S STARTUP BUTTON (GREEN) 11. BLADE STOP BUTTON (RED) 12. PRODUCT GRIP HANDLE N.A. 13. MANUFACTURER IDENTIFICATION SLICE THICKNESS CONTROL KNOB PLATE, MACHINE DATA AND UE MARKS ADJUSTABLE FOOT 14. - Page 14 SURE SLICE – GRAVITY FEED SLICERS MAIN COMPONENTS SSG220T SSG250E SSG250T SSG275E SSG275T SSG300E SSG300L SSG300T SSG330T SSG350T 11. BLADE STARTUP BUTTON (WHITE OR GREEN) 12. PRODUCT GRIP HANDLE STOP BUTTON (RED OR BLACK) 13. MANUFACTURER IDENTIFICATION N.A. PLATE, MACHINE DATA AND EU MARKS SLICE THICKNESS CONTROL KNOB 14.
-
Page 15: Machine Commissioning And Function Tests
SURE SLICE – GRAVITY FEED SLICERS MACHINE COMMISSIONING AND FUNCTION TESTS INSTALLING THE MACHINE Position the machine on a well leveled, smooth and dry top suitably dimensioned to withstand the machine weight. ELECTRICAL CONNECTION Install the machine near a EU compliant outlet derived from a system meeting the current norms. -
Page 16: Commands
SURE SLICE – GRAVITY FEED SLICERS COMMANDS START AND STOP BUTTONS Press the white or green button (1) to start running the blade. The light turns on to indicate that the machine works correctly. Press the red or black button to stop the blade. -
Page 17: Using The Machine
SURE SLICE – GRAVITY FEED SLICERS USING THE MACHINE LOADING THE PRODUCT ON THE TRAY AND SLICING Ascertain that the thickness control knob is correctly positioned to '0'. Draw back the carriage completely (towards the operator) to loading position. Lift the product grip by pulling it away by 10 cm from the blade and put it in rest position. -
Page 18: Cleaning The Slicer
SURE SLICE – GRAVITY FEED SLICERS CLEANING THE SLICER GENERAL The machine must always be accurately cleaned at least once a day, and more often if necessary. Always use protective gloves. DISASSEMBLING THE MACHINE FOR CLEANING Disconnect the plug from the mains;... -
Page 19: Reassembling The Machine
SURE SLICE – GRAVITY FEED SLICERS REASSEMBLING THE MACHINE Proceed as indicated for the previous operations but in reverse order. MAINTENANCE GENERAL The operator is allowed to perform the following maintenance operations: Blade sharpening: regularly (intervals and duration obviously depend on the use of the machine, time of use and type of product sliced);... -
Page 20: Sharpening
SURE SLICE – GRAVITY FEED SLICERS SHARPENING Models with separate sharpener 1. Clean the blade accurately using denaturized alcohol to degrease it. 2. Turn the graduated knob (1) towards the left to open completely. 3. Remove the sharpener from its box, unscrew the knurled knob and insert the threaded metallic pin inside the hole (2) provided for on the product tray so that the two emery wheels are turned towards the blade. - Page 21 SURE SLICE – GRAVITY FEED SLICERS SHARPENING Versions with built-in sharpener To sharpen the blade periodically as soon as the cutting capacity decreases. Please proceed as per the following instructions: 1. After disconnecting form the mains, clean the blade accurately using denaturized alcohol to degrease it.
-
Page 22: Lubrication
SURE SLICE – GRAVITY FEED SLICERS LUBRICATION Carriage sliding guides product grip (once a week) Use only the oil provided, otherwise use white Vaseline oil. DO NOT USE VEGETAL OILS. Spread a small quantity of oil on the bar and move the assembly 3 or 4 times. -
Page 23: Adjusting The Motor Belt Tension
SURE SLICE – GRAVITY FEED SLICERS ADJUSTING THE MOTOR BELT TENSION After a given period of service an unusual noise may occur because of the belt bedding. In this case, tighten the belt-stretcher on the side of the motor under the... -
Page 24: Troubleshooting And Remedies
SURE SLICE – GRAVITY FEED SLICERS TROUBLESHOOTING AND REMEDIES The table below indicates the most common problems that may arise during slicing and the necessary remedies. PROBLEM POSSIBLE CAUSE REMEDY The machine does not start No power supply Ascertain that the plug is is when the green button is correctly inserted. -
Page 25: Dismantling The Slicer
SURE SLICE – GRAVITY FEED SLICERS DISMANTLING THE SLICER These machines are made of the following elements: Aluminium frame; Stainless steel fittings and others; Electrical parts and cords; Electrical motor; Plastic materials, etc. Whether dismantling is entrusted to third parties or done in-house (in that last case you will have to separate the various materials) please note that disposal of the materials can only be carried out by duly authorized businesses. -
Page 26: Electrical Diagram Sig. 97 (Versions 195-220-250 E)
SURE SLICE – GRAVITY FEED SLICERS ELECTRICAL DIAGRAM SIG. 97 (versions 195-220-250 E) -
Page 27: Electrical Diagram 97 Fa (For Versions 250 T-300 E-275 T)
SURE SLICE – GRAVITY FEED SLICERS ELECTRICAL DIAGRAM 97 FA (for versions 250T - 300E – 275T) -
Page 28: Electrical Diagram 97 Fa (For Versions 300 I - 350 I)
SURE SLICE – GRAVITY FEED SLICERS ELECTRICAL DIAGRAM 97 FA (for versions 300T – 350T... -
Page 29: Three-Phase Electrical Diagram 1893 (All Versions)
SURE SLICE – GRAVITY FEED SLICERS THREE-PHASE ELECTRICAL DIAGRAM 1893 (all versions)
Need help?
Do you have a question about the SSG195S and is the answer not in the manual?
Questions and answers