Honda TRX500FM Owner's Manual page 126

2. Remove the oil filter cover ( ) by removing the bolts ( ). Let the
remaining oil drain out. Discard the oil filter ( ) in an approved
manner (page 180 ).
3. Check that the oil filter cover O-rings ( ) are in good condition and
then install a new oil filter. Use only the Honda Genuine oil filter or a
filter of equivalent quality specified for your model. Using the wrong
Honda filter or a non-Honda filter which is not of equivalent quality
may cause engine damage.
4. Reposition the spring ( ) to the engine crankcase and install a new oil
filter with the rubber seal ( ) facing out, away from the engine. You
will see the ''OUTSIDE (TOWARDS FILTER COVER)'' mark ( )
on the filter body, near the seal.
Improper installation of the oil f ilter can cause serious engine damage.
RIGHT SIDE
(4)
(3)
(3) oil filter cover
(4) bolts
(5) oil filter
(6) O-rings
Engine Oil & Filter
3
5
6
7
8
(7)
(5)
(9)
(8)
(3)
(7) spring
(8) rubber seal
(9) ''OUTSIDE'' mark
Servicing Your Honda
4
9
(6)
(4)
(cont'd)
117