Print Server - Edimax Wireless Multi-Homing Broadband Router User Manual

Parameters
Enable DMZ
WAN Port
Public IP Address
Client PC IP Address
Add DMZ
Remove DMZ
You can now configure other advance sections or start using the router (with the advance settings
in place)

2.7 Print Server

The router provides Print Server function that can let you share a printer to all PCs in your
Intranet. It supports LPD printing protocol. LPD printing protocol can be used in Windows, Linux
and other OS that provide LPD printing. For Windows users, we provide a print server network
driver. You have to install the driver before using the router as a print server.
Description
Enable/disable DMZ
Note: If there is a conflict between the Virtual Server and the
DMZ setting, then Virtual Server function will have priority over
the DMZ function.
The WAN port that the local client PC IP will bind to
The IP address of the WAN port or any other Public IP
addresses given to you by your ISP. The WAN port may use
dynamic IP or static IP given by your ISP. If your ISP give you
more than one dynamic IP addresses, you have to assign the
session number that you want to apply.
Input the IP address of a particular host in your LAN that will
receive all the packets originally going to the WAN port/Public IP
address above
Note: You need to give your LAN PC clients a fixed/static IP
address for DMZ to work properly.
Fill in the "WAN Port", "Public IP Address" and "Client IP
Address" of the DMZ to be added and then click "Add".
Then this DMZ entry will be added into the "DMZ Table"
below. If you find any typo before adding it and want to
retype again, just click "Clear" and the fields will be cleared.
If you want to remove some DMZ from the "DMZ Table",
select the DMZ entries you want to remove in the table and
then click "Delete Selected". If you want remove all DMZ
entries from the table, just click "Delete All" button. Click
"Reset" will clear your current selections.
81