Setup Menus; Basic Controls; General Setup - Technica Advanced HDMAW07 User Manual

SETUP MENUS

Basic Controls

1. While the DVD is playing or the DVD player is in the stop mode, press the Setup button.
2. Scroll through the Setup pages using the Left and Right Arrow buttons until the required menu
is highlighted.
3. Press the Down Arrow button to enter the menu. The menu items will be listed with their
current settings.
4. Press the Play button to display the options and press the Up and Down Arrow buttons to
highlight the required option.
5. Press Play to select the highlighted option.
6. If you wish to make changes to another menu item, press the Up and Down Arrow buttons to
highlight the item and repeat the procedure.
7. To exit the menu press the Setup button.

General Setup

1. Make your selection using the Up and Down Arrow buttons and press Play.
TV Display
The aspect ratio of the picture provided by the DVD player
can be varied in line with the TV in use.
The options are:
• Normal/PS
• Normal/Lb
• Wide (use when connected to a widescreen TV)
NOTE: Depending on the aspect ratio of the DVD disc, e.g. 2.35:1, the movie may still show black
lines around the edge of the picture. This is normal and not a fault with the DVD Player.
Angle Mark
When set to On an indicator will appear on the screen
when multiple viewing angles are possible on a DVD.
The Angle button can then be used to change the
viewing angle.
22
HDMAW07 HDMI DVD Player UK .indd Sec1:22 HDMAW07 HDMI DVD Player UK .indd Sec1:22
HDMI DVD Player HDMAW07
28/01/2008 11:22:21 28/01/2008 11:22:21