Getting Started; Connecting To The Tv - Technica Advanced HDMAW07 User Manual

GETTING STARTED

Connecting to the TV

The Quick Start Guide shows the simplest and most effective way of connecting your DVD player to
your television. Alternative methods are listed below.
NOTE: The DVD player will connect through the HDMI cable by default.
Only use the HDMI and one other option. Connecting more than one option may cause
interference.
Use the V-Mode button to select the correct V-Mode. Select Composite when using RCA
cables, RGB when using a SCART lead or HD when using a HDMI cable.
HDMI lead
This method is shown in the Quick Start Guide.
You can connect this unit to a compatible TV using a HDMI to HDMI lead. This method will give you
the best picture.
SCART lead
This method is shown in the Quick Start Guide.
You can use a SCART lead with your DVD player. The connection uses component video signals, i.e.
the red, green and blue (RGB) content of the video are sent on separate signals. This gives the best
quality video signal.
RCA AV cable
This is the method used in the Quick Start Guide.
The RCA AV cable is not supplied with your DVD player. Connect the video (yellow), audio left
(white) and audio right (red) RCA connectors. In this method the video is a composite signal of the
chrominance and luminance.
S-Video lead
You can connect this unit to a compatible TV using an S-Video lead (not supplied).
8
HDMAW07 HDMI DVD Player UK .indd Sec1:8 HDMAW07 HDMI DVD Player UK .indd Sec1:8
HDMI DVD Player HDMAW07
28/01/2008 11:22:16 28/01/2008 11:22:16