Using Your Iphone; Listening To A Non-Docking Ipod Of Other Portable Audio Devices; Watching Videos On An External Monitor Or Tv - Iluv iHD171 Instruction Manual

OPERATIONAL INSTRUCTIONS

Using your iPhone

1. When your iPhone is successfully detected in the dock, the "iPod" icon is shown on the display.
2. During playback, hold I or I on the remote control to start high speed search. When the desired
passage is found, release the key. Normal playback will resume.
3. You can watch your favorite movies on your TV.
4. If there is an incoming call during playback of music or movies, the word "Decline" or "Answer" will
appear on the screen if your iPhone is unlocked (or has warning notice "slide to unlock"). Normal
playback will resume at the end of the call.
Listening to a non-docking iPod or other portable audio devices
If you are using your iPod without a docking port, other MP3 player or other portable audio device, it
can still be played on the iHD171.
1. Plug one end of the audio cable into the headphone or LINE OUT jack on your device and the
other end of the cable into the clock radio AUX IN Jack, located on the back of the unit.
2. Press the SOURCE/WAKE TO button on the clock radio until AUX icon displays on LCD.
3. Turn on and play your device.
4. Turn the VOLUME knob on the clock radio (or press Volume+/- buttons on the remote control) to
adjust the system volume. You may need to adjust your device volume, too.
5. To turn off the unit, press the POWER button.
15 | iLuv
OPERATIONAL INSTRUCTIONS

Watching Videos on an External Monitor or TV

1. Connect the provided video cable (yellow) into the rear of the iHD171 (VIDEO). Then connect the
opposite plug side of the video cable to the video input jacks of the external display device.
2. Connect the provided audio cable (red and white) into the rear of the iHD171 (AUDIO). Then
connect the opposite plug side of the video cable to the audio input jacks of the external display
device.
3. Turn on the external display device. Change the mode of the external display device to the AV
mode if necessary. (Note: Please refer to the owner's manual of external devices for AV Mode)
4. Place your iPhone or iPod in the built-in universal dock.
5. Play the video on your iPhone or iPod. (Please note that the "TV Out" setting of your iPod must be
set to "On" in order to see the iPod video contents on your TV via the iHD171.).
IMPORTANT: When Using TV Out, please make sure your iPod Video setting is set to "TV Out-ON"
Please follow the instructions below on your iPhone or iPod to change the setting:
1. On the menu screen of your iPhone or iPod, select the "Videos" option.
2. On the next menu screen, select the "Video Settings" option.
3. On the next menu screen, select the "TV Out" option and set it to "On. " *
Note: When watching video content using Video-out jack and TV Out is set to ON on your iPhone or iPod, your iPhone or
iPod and the connected external device will not simultaneously display pictures or video. To play videos from your iPhone or
iPod, TV-out should be set to "OFF."
iHD171 | V10M10_IM_EN_103008 iLuv | 16