Listening To The Radio; Storing Preset Stations - Iluv iHD171 Instruction Manual

Hd radio receiver with itunes tagging
Table of Contents

Advertisement

OPERATIONAL INSTRUCTIONS

Listening to the Radio

Extend the FM wire antenna fully for best reception (do not strip, alter or attach to other antennas).
The AM loop antenna should be placed up to 12" away from the unit for best reception. Rotate the
AM loop antenna as required for best reception.
1. Press the POWER button to turn on the unit. Press the SOURCE / WAKE TO button on the clock
radio to select AM or FM band to play the radio. The radio frequency appears at the center of
the display.
2. Turn the TUNING knob on the clock radio
(or press I or I on the remote control) to
tune in the desired station. Press and hold
the I or I on the remote control for about
two (2) seconds to Auto scan to the next
clear station.
3. Turn the VOLUME knob on the clock radio
(or press Volume+/- button on the remote
control) to adjust the system volume.
4. Press the EQ button to select ROCK, POP,
CLASSIC, JAZZ, BASS or NORMAL for the
desired sound effect.
5. Press the MUTE button on the remote control
to turn OFF the sound. Press the MUTE button
again to restore the sound.
6. To turn off the unit, press the POWER button
to turn it off.
11 | iLuv
OPERATIONAL INSTRUCTIONS

Storing Preset Stations

This unit allows you to program 20 stations on FM and 10 stations on the AM band.
1. Turn the TUNING knob on the clock radio
(or press I or I on the remote control) to
tune to the station you wish to store.
2. Press the MEMORY button once to store the station.
3. While preset track indicator flashing on the display,
press PRESET button repeatedly to select preset track.
4. Press MEMORY button again to confirm after your
preset number selected.
5. To store other stations, repeat the steps above.
Recalling Preset Stations: Press the PRESET button
repeatedly to select the desired station.
iHD171 | V10M10_IM_EN_103008
iLuv | 12

Advertisement

Table of Contents
loading

Table of Contents