Table of Contents
Advertisement
USING A TV DISPLAY
If your TV is equipped with AV input jacks you can connect it
to the AUDIO OUT and VIDEO OUT jacks of your Media Player.
With these connections made the menu screens, sound and
vision from your player will be displayed on the TV.
Connecting to a Composite/Audio input of the TV:
Connect the red, white and yellow jacks of an AV cable
(supplied) to the AV input jacks of your TV. These are often
located on the front or side of the TV.
Connect the other end of the cable to the AUDIO OUT and
VIDEO OUT jacks of your Media player.
Connecting to a SCART input of the TV:
The same 3-way connection cable is used to connect to the
SCART input of a TV, but a SCART adaptor (not supplied) will
be required. The SCART adaptor is a SCART plug with three
RCA jack connections.
•
Connect the plugs at one end of a 3-way audio/video RCA
cable (supplied) to each of the audio and video output
jacks on the back panel of the Media Player. The plugs
are colour coded to match the jack colours.
•
Connect the other end of the audio/video cable to the
jacks on the SCART adaptor.
•
Connect the SCART adaptor to a free AV input on the TV.
Using your TV as a display:
•
Set the TV input selector to the AV input that you used
when connecting the AV or SCART cable.
•
Switch on the AV output (see the Setup section on pages
21 and 22).
•
Turn up the volume on both the unit and the TV.
The TV will now play menus, audio and video from your Player.
COMPOSITE VIDEO (CVBS) CONNECTION TO A TV
SCART CONNECTION
19
Advertisement
Table of Contents
