Marquant MCR-1295 Owner's Manual page 17

BASIC OPERATION
MODE SELECTION
Press MOD button on the front panel or MODE on the remote control to select the desired mode to enjoy.
BRAKE FUNCTION
If the brake wire (pink wire) isn't connected to the ground (when driving), the picture will not be shown on the
screen in DVD/AUX in mode for safety purpose. Only the audio will be heard.
Note: Only when parking, the DVD/AUX in picture can be seen on the screen. When driving, the warning
information will be displayed.
RESET FUNCTION
The reset button RST is on the front panel of the unit.
It must be activated with either a ballpoint pen or thin metal object. The reset button is to be activated for the
following reasons:
1. Initial installation of the unit when all wiring is completed.
2. All the function buttons do not work.
3. Error symbol on the display.
17