D-Link AirPremier N DAP-2360 Quick Install Manual page 6

To setup and manage the DAP-2360 from a computer, use one of
the following methods:
1. Connect a straight through Ethernet cable between the
access point and your computer.
2. Connect the access point to a switch or router and use a
computer that is also connected to that switch or router.
3. Please start your web browser
program, type the IP address of the
device (http://192.168.0.50) and
press Enter. Make sure that the IP
addresses of the device and your
computer are in the same subnet.
6
Configuration
DAP-2360 Install Guide