1.Restore Factory Settings - IP-Cam JW0004 User Manual

Record cover means when the disk is full, the old recording files will be deleted automatically.
3.5.10 Ugrade Device Firmware
In this sector, you can do following operations.
3.5.10.1 Restore Factory Settings
When users forget password, we can restore ex-factory settings, when click, a picture will
pop up, Click ok, and wait for 1 minute and you can use it normally. User setting feature
restores
3.5.10.2 Reboot Device
Click reboot, it appears a window, click ok, wait for 1 minute and you can use it
normally
Figure 3.34
Figure 3.35
31