Table Of Contents - Panasonic Lumix DMC-FX12P Service Manual

TABLE OF CONTENTS

1 Safety Precaution ------------------------------------------------ 4
1.1. General Guidelines---------------------------------------- 4
1.2. Leakage Current Cold Check--------------------------- 4
1.3. Leakage Current Hot Check (See Figure 1.) ------- 4
1.4. How to Discharge the Capacitor on Flash Top
PCB ----------------------------------------------------------- 5
2 Warning -------------------------------------------------------------- 6
2.1. Prevention of Electro Static Discharge (ESD)
to ElectrostaticallySensitive (ES) Devices----------- 6
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only) ---------------------------------------------------------- 6
2.3. Caution for AC Cord(For EB/GC/SG) ---------------- 7
2.4. How to Replace the Lithium Battery ------------------ 8
3 Service Navigation ----------------------------------------------- 9
3.1. Introduction-------------------------------------------------- 9
3.2. General Description About Lead Free Solder
(PbF)---------------------------------------------------------- 9
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ----------------------------------------- 9
3.4. How to Define the Model Suffix (NTSC or PAL
model) -------------------------------------------------------10
4 Specifications ----------------------------------------------------13
5 Location of Controls and Components ------------------14
6 Service Mode -----------------------------------------------------15
6.1. Error Code Memory Function--------------------------15
6.2. Confirmation of Firmware Version--------------------18
7 Service Fixture & Tools----------------------------------------19
7.1. Service Fixture and Tools-------------------------------19
7.2. When Replacing the Main PCB -----------------------20
7.3. Service Position-------------------------------------------20
8 Disassembly and Assembly Instructions ---------------21
8.1. Disassembly Flow Chart --------------------------------21
8.2. PCB Location ----------------------------------------------21
8.3. Disassembly Procedure---------------------------------22
8.4. Disassembly Procedure for the Lens ----------------26
8.5. Assembly Procedure for the Lens --------------------29
8.6. Removal of the CCD Unit-------------------------------32
8.7. Removal of the Focus Motor---------------------------33
8.8. The Applyment of Grease Method -------------------33
9 Measurements and Adjustments---------------------------34
9.1. Matrix Chart for Replaced Part and Necessary
Adjustment -------------------------------------------------34
10 Maintenace --------------------------------------------------------35
10.1. Cleaning Lens and LCD Panel ------------------------35
PAGE
3
PAGE