Talk Back Scan (Automatic Reply On Called Group); Virtual Group (Esas Operation Only); Busy System Queuing - Uniden SVS8025TSE Operating Manual

Talk Back Scan (Automatic Reply on Called Group)

The radio continually scans through all programmed and non Locked-Out
Call Groups. It transmits on the selected Call Group unless the Auto-Reply
option is programmed and a call has just been received. To automatically
transmit on this new Call Group, lift the microphone from the hanging bracket
within the programmed time (1 to 8 seconds).

Virtual Group (ESAS Operation Only)

When you are in a different Cell, the radio will make a half-duplex Selective
Call to the system to remain part of the original Group. When this happens,
and you transmit, you may see a change in the Call Group shown on your
radio display. However, you will still be connected to the original Call Group.

Busy System Queuing

When you select a telephone Call Group, and all lines are busy, the radio will
automatically enter a queue until a line is available. You will hear three quick
beeps indicating you are in Busy System Queuing. When a line becomes
available, you will hear a steady string of beeps. You must press the [PTT]
key within 10 seconds to make the connection or lose the line.
Busy System Queuing lasts for a maximum of 60 seconds. If a line is not
available during that time, the queue will be canceled, and you must try to
access a line again, and restart the Queuing.
- 16 -
SVS8025TSE