1.8. Working environment ---------------------------------------------------------------------------------------------------------10 1.9. System Requirements ---------------------------------------------------------------------------------------------------------10 1.10. Safety Notice ------------------------------------------------------------------------------------------------------------------10 2. Network Configuration and Management Introduction 2.1. Prepare to log in OT-4020VW ONU-----------------------------------------------------------------------------------------11 2.2. Default Logon Information----------------------------------------------------------------------------------------------------11 2.3. log in the OT-4020VW GEPON ONU-----------------------------------------------------------------------------------------11 3. Status 3.1. Device Info -----------------------------------------------------------------------------------------------------------------------12 3.2.
Page 3
OT-4020VW GEPON ONU User Manual 4.1.4. Configuration Example for VLAN-------------------------------------------------------------------------------23 4.2. Port Binding--------------------------------------------------------------------------------------------------------------------24 4.2.1. Enable Port Binding------------------------------------------------------------------------------------------------24 4.2.2. Enable VLAN Binding-----------------------------------------------------------------------------------------------24 4.3. DHCP Server--------------------------------------------------------------------------------------------------------------------24 4.3.1. IPV4 DHCP Server---------------------------------------------------------------------------------------------------24 4.3.2. IP address Reservation---------------------------------------------------------------------------------------------25 4.3.3. IPV6 DHCP Server----------------------------------------------------------------------------------------------------25 4.4. Wireless LAN Config-----------------------------------------------------------------------------------------------------------26 4.4.1.
9.6.1. DIANOSIS HELP-----------------------------------------------------------------------------------------------------73 1. Product Description The OT-4020VW is a Telecom grade GEPON Optical Network Unit (ONU) based on IEEE802.3ah Gigabit EPON Standard. It comes with GEPON WAN interface, 4 Port IEEE802.11n Wireless Router and 2 FXS Port Analog Telephone adaptor for Fiber To The Home Networking and VoIP applications.
Page 6
OT-4020VW GEPON ONU User Manual Support G.711,G.723.1,G.729A–8 kbps,G.726,G.722, ILBC voice codecs Support DTMF Tone Detection, DTMF Tone Relay, Multiple Calling Tone, FSK Caller ID Support Calling line Identification Presentation and Calling line Identification Restriction Support call forwarding, call hold features ...
OT-4020VW GEPON ONU User Manual 1.3. Rear View & Rear Interface Description 1.4. LED Description Port Description LED ON/OFF Turn on/Turn off LED Indicators 1.25G GEPON SC Port Phone1, Phone2 Standard RJ11 ports for VoIP LAN1, iTV, LAN 3, LAN 4...
Page 8
OT-4020VW GEPON ONU User Manual 1.4. LED Description: Color Status Description Green Light ONU is powered Extinguished ONU is not powered Extinguished ONU receives good GEPON Signals Flashing ONU receives poor GEPON Signals GREEN Light ONU logic link is established successful...
OT-4020VW GEPON ONU User Manual 1.5. Wireless Description Built-in IEEE802.11n Wireless Router, Support wireless transmission rate of 150Mbps, 2.4GHz Comes with 2 external Antenna of 5db Wireless Range support: Outdoor: 150m, Indoor: 100m Support 64/128 bit WEP Open & Shared, IEEE802.1x, WPA and WPA2 wireless authentications...
2.1. Prepare to log in OT-4020VW ONU Before to log in the OT-4020VW ONU, please make sure the connections in between the ONU and the PC is correct. 2.1.1. Configure the IP address of your Manage PC to 192.168.86.x (2-254), subnet 255.255.255.0, Gateway: 198.168.86.1 2.1.2.
3. Status After log into the OT-4020VW ONU, you will be direct to the ‘ Status ‘ page. There are 5 sub-options, ‘ Device Info ‘, ‘INTERNET’, ‘LAN & WLAN ’, ‘VoIP Status’, ‘ Remote ‘ under the ‘ Status ‘ page.
OT-4020VW GEPON ONU User Manual 3.2. INTERNET 3.2.1. IPV4 Status Click the ‘INTERNET’ – ‘ IPV4 Status ‘, you will see the IPV4 Internet connection status as below: 3.2.2. IPV6 Status Click the ‘ INTERNET ‘ – ‘ IPV6 Status ‘, you will see the IPV6 internet connection status as below: If you are connecting through IPV4, there will be no IPV6 internet connection status shown.
OT-4020VW GEPON ONU User Manual 3.2.3. EPON Info Click the ‘INTERNET ‘ – ‘ EPON Info ‘, you can see ‘EPON STATUS’, ‘EPON link connection statiscal information’, ‘ Alarm Status ‘ and ‘ Fiber Transceiver Details ’ details as below: 3.3.
OT-4020VW GEPON ONU User Manual 3.3.2. LAN Status Click the ‘ LAN & WLAN ‘ – ‘LAN STATUS ‘, you will see the ‘ ONU IP Address ‘, ‘Packets Through LAN ‘ , ‘LAN Clients’ information as below: OverTek www.overtek.com.br...
OT-4020VW GEPON ONU User Manual 3.3.3. USB STATUS Click the ‘ LAN & WLAN ‘ – ‘USB STATUS‘, you will see the connection status for the USB host port. 3.4. VoIP Status Click the ‘ VoIP Status ‘ – ‘VoIP Status‘, you will see the registration status for VoIP.
OT-4020VW GEPON ONU User Manual 3.5. Remote Status 3.5.1. Interaction Click ‘ Status ‘ – ‘ REMOTE ’ – ‘Interaction ‘, you can check the status for the remote interaction established with the remote management ACS Server. This function is for TR069.
OT-4020VW GEPON ONU User Manual INTERNET 4.1. WAN Config Click ‘ INTERNET ‘ – ‘ WAN Config ‘ to configure the internet access/WAN access for your OT-4020VW GEPON ONU. You can configure PPPOE, DHCP, Static IP, VLAN as your internet connection mode. OverTek www.overtek.com.br...
OT-4020VW GEPON ONU User Manual Mode: You can use either ‘Route ‘ or ‘ Bridge ‘ mode. Connection Mode: This option is for defining either to use IPV4 or IPV6 mode. By default, it’s IPV4 mode. DHCP: On DHCP mode, you will obtain a dynamic IP from your ISP.
Page 20
OT-4020VW GEPON ONU User Manual Input the PPPOE User Name and password Choose the Dial-up mode ‘ Automatically Connect ‘ Select the services that you want for this PPPOE connection Select the ports that you want to bind for this PPPOE connection ...
OT-4020VW GEPON ONU User Manual Wait for about 15s, you will have your PPPOE connection established successfully. 4.1.2. Configuration Example for STATIC IP: Click ‘ INTERNET ‘ – ‘ WAN Config ‘ – ‘ Connection Name ‘ – ‘ Choose a new WAN connection ‘...
Page 22
OT-4020VW GEPON ONU User Manual Input the IP address, Subnet Mask, Default Gateway and DNS Select the services that you want for this STATIC IP connection Select the ports that you want to bind for this STATIC IP connection ...
Go to ‘ Mode ‘ – Select the mode that you want Select ‘ DHCP ‘ – In this way, your OT-4020VW will obtain an IP address automatically from your ISP Leave the MTU option as default ...
OT-4020VW GEPON ONU User Manual Notice: For all DHCP, STATIC IP, PPPOE connection modes, you can configure VLAN IDs as you may wish. Below is the example for you to configure VLAN ID on Bridge mode. Click ‘ INTERNET ‘ – ‘ WAN Config ‘ – ‘ Connection Name ‘ – ‘ Choose a new WAN connection ‘...
OT-4020VW GEPON ONU User Manual 4.2.1. Enable Port Binding 4.2.2. Enable VLAN Binding Click ‘ Internet ‘ – ‘Port Binding ‘ to configure VLAN binding function which is specially for IPTV VLAN applications. After done, click ‘ Apply ‘ button to save and apply new settings.
OT-4020VW GEPON ONU User Manual Click ‘ INTERNET ‘ – ‘DHCP Server ‘ -- ‘IP address Reservation ‘ to configure the Static IP address for a specific MAC. You should configure the MAC address and associate it with an available IP Address. After done, the configured IP Address will be the Static LAN IP address of the device who own the configured MAC address.
OT-4020VW GEPON ONU User Manual 4.4.1. WLAN Config Click ‘ INTERNET ‘ – ‘WLAN Config ‘ to configure Wireless parameters: Enable Wireless SSID2: Check the box to enable Wireless SSID2 Enable Wireless SSID3: Check the box to enable Wireless SSID3...
Page 28
By default, these protection mechanisms are enabled. However, you can turn off these protection mechanisms. Only support 802.11n Client: If this option is enabled, then the OT-4020VW will not be compatible with your IEEE802.11b/g devices. In such case, the OT-4020VW support only IEEE802.11n devices.
OT-4020VW GEPON ONU User Manual 4.4.2. WLAN Security Click ‘ Internet’ – ‘WLAN Config ’ – ‘Advanced’ to configure wireless security policies Choose SSID: To choose the appropriate SSID that you configured. Wifi Authentication: To configure the wireless authentication mode for your network A.
OT-4020VW GEPON ONU User Manual 4.5. Remote MGMT (Remote Management) 4.5.1. ITMS Server (Insurance TeleMarketing Sales System) Click ‘ INTERNET ‘ – ‘REMOTE MGMT ‘ – ‘ ITMS Server ‘ to configure the parameters for remote management of the ONU through TR069.
Click ‘ INTERNET ‘ – ‘REMOTE MGMT ‘ – ‘AUTO PROVISION ‘ to enable Auto Provision function of your ONU. The Auto Provision function is for remote configure and update firmware of your OT-4020VW ONU. Enabling this function, you can configure the ONU remotely without human involvement. The OT-4020VW support auto provisioning through FTP, TFTP or http servers, you only need to update the configuration files and the firmware on your server, then when the Auto Provision condition is met, the ONU will automatically upgrade to the new configuration or new firmware version.
You can leave this blank. Config Encryt Key: The OT-4020VW ONU support AES Encryption. You can encrypt the configuration file with AES and upload it onto the Auto Provision Server. You should fill the Encryption key in the ONU so the ONU can decrypt the configuration file.
Page 33
OT-4020VW GEPON ONU User Manual D. Name the Configuration file in the format ‘mac address +.cfg’. In this example, the MAC address is 001fa491c20e. So the correct configuration file name should be ‘001fa491c20e.cfg’. E. Edit the configuration file using any html file editors, such as Dream Weaver.
Auto Provision Server, then checksum and apply by itself. 4.6. QOS 4.6.1. QOS Config Click ‘ INTERNET ‘ – ‘QOS ‘ –‘ QOS Config ’ to config QOS for your OT-4020VW ONU. OverTek www.overtek.com.br 34 / 75...
Page 35
OT-4020VW GEPON ONU User Manual QOS Templates: To choose the available templates or to customize the template to determine what services to enable the QOS for. Templates Descriptions: ‘Internet, TR069’ – To enable QOS for Internet Data and TR069 service ‘Internet, TR069, VoIP’- To enable QOS for Internet Data, TR069 and VoIP services...
Page 36
OT-4020VW GEPON ONU User Manual Edit: To edit the service that you want to enable for QOS. Add Category: Click this button to Edit Service Classification & Edit Flow Classification. Delete Category: Click this button to delete the configured QOS service and flow classification template...
Apply: To save and apply the enabled or disabled Flowcache. 4.7. Time Config 4.7.1. Time Server Click ‘ INTERNET ‘ – ‘Time Config ‘ – ‘Time Server ‘ to config time for your OT-4020VW ONU: OverTek www.overtek.com.br 37 / 75...
4.8.1. Static Config Click ‘ INTERNET ‘ – ‘Routing ‘– ‘Static Config ‘, click ‘ Add’ button to config a Static route for your OT-4020VW ONU: Destination Network Address: The destination address that you want to add a route for...
4.8.3. IPV6 Static Route Click ‘ INTERNET ‘ – ‘Routing ‘– ‘IPV6 Static Route ‘ to config an IPV6 Static Route for your OT-4020VW ONU. Add: Click ‘ Add ‘ to add an IPV6 Static Route for your OT-4020VW ONU...
OT-4020VW GEPON ONU User Manual Loop Detection function is enabled: Check the box to enable Loop Detection function. Detection Time: To config the network loop detecting time interval. Failback Time: To config the timeout values for your network look detecting request.
Apply: Click ‘ Apply ‘ button to save and apply new settings. 5.2. Firewall 5.2.1. Security Level Click ‘ Security ‘ – ‘Security Level ‘– to set the firewall level for the multiple services pass-through the OT-4020VW ONU. Click ‘Apply’ to save and apply new settings. OverTek www.overtek.com.br...
OT-4020VW GEPON ONU User Manual 5.2.2. ANTI-DOS Click ‘ Security ‘ – ‘Firewall ‘– ‘ANTI-DOS’ to prevent OT-4020VW ONU from DOS attack. Disable: To disable protection for DOS attack Enable: To enable protection for DOS attack Apply: Click ‘ Apply ‘ button to save and apply new settings.
OT-4020VW GEPON ONU User Manual Enable: Enable to creat a filter based on MAC address Disable: Disable to creat a filter based on MAC address Blacklist: Enable banning a specific MAC Address Whiltelist: Enable allowing a specific MAC Address Protocol: To determine which service to be allowed or denied with the appointed MAC address MAC Address: The MAC address that you want to add the MAC Address filter for Add: Click ‘...
Page 44
OT-4020VW GEPON ONU User Manual Filter Name: To specify a name for the filter IP Version: To determine either IPV4 or IPV6 version for the filter Protocol: To determine which protocol to be allowed or denied Source IP Address range: The IP Address range that you want to allow or deny. E.g, 192.168.1.2 – 192.168.1.254...
Destination Port: The Port Number for the Destination IP or host that you allowed or denied. Apply: Click ‘ Apply ‘ button to save and apply new settings. Application 6.1. DDNS config Click ‘ Application ‘ – ‘DDNS config ‘– to creat a Dynamic DNS for your OT-4020VW ONU. OverTek www.overtek.com.br 45 / 75...
Page 46
OT-4020VW GEPON ONU User Manual Enable Dynamic DNS Service: Check the box to enable Dynamic DNS service Add: Click ‘Add’ to add a Dynamic DNS connection OverTek www.overtek.com.br 46 / 75...
6.2.2. DMZ Config Click ‘ Application ‘ – ‘Advanced NAT ‘– ‘DMZ Config ‘– to config DMZ host for your OT-4020VW ONU. Enable DMZ Host: Check the box to enable DMZ DMZ Host IP Address: The LAN IP address that you want to enable with DMZ Apply: Click ‘...
OT-4020VW GEPON ONU User Manual Port: The WAN interface that you want to enable with Virtual Host Server service Service Name: Select the services that you want to enable with Virtual Host Server service Server IP Address: The LAN IP address that you want to enable for Virtual Host Server Beginning Port Outbound: The outbound beginning port of your Virtual Host server.
OT-4020VW GEPON ONU User Manual 6.4. VoIP Config 6.4.1. SIP Basic Config Click ‘ Application ‘ – ‘VoIP Config ‘– ‘SIP Basic Config ‘ to configure main VoIP Parameters. Bound Port For VoIP: Check the box to select the WAN connection interface for your VoIP service.
OT-4020VW GEPON ONU User Manual SIP Account 1, 2: There are two SIP accounts able to be registered with OT-4020VW simultaneously. Account Enabled: Check the boxes to enable the associated SIP 1 and SIP 2 accounts. User Number: The SIP User name...
OT-4020VW GEPON ONU User Manual 6.4.3. Voice Media Click ‘ Application ‘ – ‘VoIP Config ‘– ‘VoIP Media ‘ to configure the Advanced Voice features. Set the Voice codecs for SIP account 1 and 2 OverTek www.overtek.com.br 52 / 75...
Page 53
OT-4020VW GEPON ONU User Manual Enable T.38 Redundancy: Check the box to enable T.38 fax redundancy. Enable VBD redundancy: Check the box to enable VBD (Voice Band Data) redundancy Fax Session Mode: Set the fax session mode Fax codec: Set the codec for Fax Enable T38 Fax: Enable T.38 Fax...
OT-4020VW GEPON ONU User Manual Signaling DSCP: The QOS value of SIP Signaling Media DSCP: The QOS value for SIP media Voice Jitter Buffer Mode: Set the Voice Jitter buffer mode Voice tendencies Jitter Buffer minimum: Set the minimum value of Voice Tendencies Jitter buffer...
Page 55
OT-4020VW GEPON ONU User Manual URL and "*" Escape Config: Check the box to enable URL and ‘*’ Escape config URI and "#" Escape Config: Check the box to enable URL and ‘#’ Escape config No SDP Ringing in 18x: Check the box to disable SDP in 18x ring process...
OT-4020VW GEPON ONU User Manual Session Expiration Time Config: Set the SIP session expiration time Min Session Expiration Time Config: Set the minimum SIP Session Expiration Time SIP Message Re-transit Initial Timer: Set the SIP message re-transit initial time Invite Message Re-transit Time: Set the SIP Invite Message re-transit time...
Page 57
OT-4020VW GEPON ONU User Manual Syslog Server IP: The Server Address that you want to store your SIP Syslog Syslog Server Port: The port number of your SIP Syslog server Enabled Syslog: Check the box to enable SIP Syslog Enabled Klog: Check the box to enable SIP Klog...
6.5.1. IGMP Snooping Click ‘ Application ‘ – ‘IGMP Config ‘– ‘IGMP Snooping ‘ to set up IGMP Snooping for your OT-4020VW ONU. Enable IGMP Snooping: Check the box to enable IGMP Snooping of your ONU. Apply: Click ‘ Apply ‘ button to save and apply new settings.
6.6.2. MLD Proxy Click ‘ Application ‘ – ‘MLD Config ‘– ‘MLD Proxy ‘ to enable MLD Proxy for your OT-4020VW ONU. Internet Connection: The IGMP WAN interface that you will enable for the MLD Server Enable IGMP Server: Check the box to enable MLD Server Apply: Click ‘...
Apply: Click ‘ Apply ‘ button to save and apply new settings. Management 7.1. User Click ‘Management ‘ – ‘User ‘ to set up the User Account password for your OT-4020VW GEPON ONU. By default, the password for User account is ‘ user’. You can modify this password. OverTek www.overtek.com.br...
Click ‘Management ‘ – ‘Device ‘ – ‘USB Backup’ to back the configuration file to your USB Storage device. 7.2.3. Reset ONU Click ‘Management ‘ – ‘Device ‘ – ‘Reset ONU ‘ to rest your OT-4020VW ONU to factory default settings. Note: Reset ONU to factory default settings will not flush your Internet and VoIP configurations.
7.3. LOG 7.3.1. Writing Level Click ‘Management ‘ – ‘Writing Level‘ –‘ to manage syslog of your OT-4020VW GEPON ONU. Log: Check the box to enable or disable Log for your OT-4020VW ONU Log Level: To determine which type of log to be recorded in the log file Display Level: To determine which type of log to be displayed in the log file Mode: To determine either to enable local or remote syslog.
OT-4020VW GEPON ONU User Manual 7.3.2. Config Syslog Click ‘Management ‘ – ‘LOG‘ – ‘Config Syslog ‘ to check or manage logs of your OT-4020VW GEPON ONU. Access Log: Click the ‘ Access Log’ button to view the access logs of your ONU.
OT-4020VW GEPON ONU User Manual 8.2. Ping Test Click ‘Diagnosis ‘ – ‘Network Diagnosis ‘ –‘ Ping Test ‘ to diagnose the Internet connections. OverTek www.overtek.com.br 65 / 75...
Inform Report is a function for reporting failures or logs to the ACS server. Click ‘Diagnosis ‘ – ‘Network Diag ‘ – ‘Inform Report ‘ to diagnose the Inform Report function of OT-4020VW ONU. Test: Click the ‘ Test ‘ button to manually send message to a remote TR069 ACS Server.
OT-4020VW GEPON ONU User Manual 9. Help 9.1. Status Help 9.1.1. Device Info Click ‘ Help ‘ – ‘ Status Help ‘ – ‘Device Info’ to view the help information of device status. 9.1.2. Internet Status Click ‘ Help ‘ – ‘ Status Help ‘ – ‘Internet Status’ to view the help information of Internet connection status.
OT-4020VW GEPON ONU User Manual Click ‘ Help ‘ – ‘Internet Help ‘ – ‘WAN Config’ to view the help information of WAN Configuration/Internet Configuration. 9.2.2. DHCP Config Click ‘ Help ‘ – ‘Internet Help ‘ – ‘DHCP Config’ to view the help information of DHCP Configuration.
OT-4020VW GEPON ONU User Manual 9.2.5. QOS Click ‘ Help ‘ – ‘Internet Help ‘ – ‘QOS ’ to view the help information of QOS Configuration. 9.2.6. Time Management Click ‘ Help ‘ – ‘Internet Help ‘ – ‘Time Management ’ to view the help information of time settings.
OT-4020VW GEPON ONU User Manual 9.3. Security Help 9.3.1. WAN Access Configuration Click ‘ Help ‘ – ‘Security Help ‘ – ‘WAN Access Configuration ’ to view the help information of URL Filter. 9.3.2. Firewall Config Click ‘ Help ‘ – ‘Security Help ‘ – ‘Firewall Config ’ to view the help information of Firewall configurations.
OT-4020VW GEPON ONU User Manual 9.3.4. Port Filter Click ‘ Help ‘ – ‘Security Help ‘ – ‘Port Filter ’ to view the help information of Port Filter. 9.4. APP Help 9.4.1. NAT Config Click ‘ Help ‘ – ‘APP Help ‘ – ‘NAT Config ’ to view the help information of NAT.
OT-4020VW GEPON ONU User Manual 9.4.3. IGMP Config Click ‘ Help ‘ – ‘APP Help ‘ – ‘IGMP Config ’ to view the help information of IGMP. 9.4.4. Daily APP Click ‘ Help ‘ – ‘APP Help ‘ – ‘Daily APP ’ to view the help information of Daily Applications.
OT-4020VW GEPON ONU User Manual 9.5. MGMT HELP 9.5.1. User MGMT Click ‘ Help ‘ – ‘MGMT Help ‘ – ‘USER MGMT ’ to view the help information of User account modification. 9.5.2. Device MGMT Click ‘ Help ‘ – ‘MGMT Help ‘ – ‘DEVICE MGMT ’ to view the help information of Device Management.
OT-4020VW GEPON ONU User Manual 9.5.4. Maintenance Click ‘ Help ‘ – ‘MGMT Help ‘ – ‘Maintenance ’ to view the help information of maintenance. 9.6. DIANOSIS HELP 9.6.1. DIANOSIS HELP Click ‘ Help ‘ – ‘DIANOSIS HELP ‘ – ‘DIANOSIS HELP’ to view the help information of Diagnosis.
OverTek. Disclaimer Notice: No license is granted, implied or otherwise, under any patent or patent rights of OverTek. OverTek, makes no warranties, implied or otherwise, in regard to this document and to the products described in this document. The information provided by this document is believed to be accurate and reliable to the publication date of this document.