OverTek OT-4020VW GEPON ONU User Manual page 33

OT-4020VW GEPON ONU User Manual
D. Name the Configuration file in the format 'mac address +.cfg'. In this example, the MAC address is 001fa491c20e. So the
correct configuration file name should be '001fa491c20e.cfg'.
E. Edit the configuration file using any html file editors, such as Dream Weaver.
E.1. To upgrade configuration file, it is mandatory that you add ' <<GEPON ONU CONFIG FILE>>Digests:3.123 ' into the
'001fa491c20e.cfg' configuration file to enable Auto Provisioning work correctly. See below for the example:
E.2. If you want to update both configuration file and firmware, then you should add the following parameters into the
configuration file:
<<GEPON ONU CONFIG FILE>>Digests:3.123
<<AUTOUPDATE CONFIG MODULE>>Digests:1008
Auto Image Server:ftp.overtek.com.br
Auto Image Protocol:2
Auto Image Name:OT4020VW.w
In the above parameters, the Auto Image Server should be your own server address
The Auto Image protocol definition: 1 =FTP, 2 = TFTP, 4 = HTTP, you can set your preferred method.
The Auto Image name can be any name that you prefer, e.g, ' 123.w '.
OverTek www.overtek.com.br
33 / 75