OverTek OT-4020VW GEPON ONU User Manual page 28

OT-4020VW GEPON ONU User Manual
Band: The desired wireless band of your wireless router. It is working at 2.4GHz by default
Channel: The Wireless Channel of your wireless Router. You can manually set it to the required channel
802.11n/EWC: Enabling 802.11n/EWC, the wireless speed will be accelerated
Bandwidth: To determine the wireless bandwidth of your wireless router. It could be set to 20M or 40M
Control Sideband: Control the frequency to be higher or lower than standard Telecom frequencies.
802.11n Rate: To set the Wireless Power Level
802.11n Protection Rate: The 802.11n specification provides protection rules to guarantee that 802.11n transmissions do
not cause interference with legacy stations or access points. By default, these protection mechanisms are enabled.
However, you can turn off these protection mechanisms.
Only support 802.11n Client: If this option is enabled, then the OT-4020VW will not be compatible with your IEEE802.11b/g
devices. In such case, the OT-4020VW support only IEEE802.11n devices.
54G Rate: This is to enable Broadcom 54G Wireless Chipset, enabling more compatibility to other IEEE802.11b, IEEE802.11g
based devices.
Multicast Rate: To set the wireless transmission power for Multicast applications
Basic Rate: This is to set the wireless transmission power for IEEE802.11b/g
XPress™ Technology: Broadcom's standards-based frame-bursting technology to improve 802.11 wireless LAN
performance. If the WMM (Quality of Service) is enabled, the XPress™ Technology option can also be enabled.
Transmission Power: To set the Wireless Transmission power for the wireless router
WMM(Wi-Fi Multimedia): To enable WiFi Multimedia
WMM (Quality of Service): To enable QOS in Wireless transmission. You can also enable Xpress Technology after enabling
WMM (Quality of Service) Option
WMM APSD: To enable the Power Saving mode in WiFi Multimedia
Apply: Click 'Apply' to save and apply new settings.
OverTek www.overtek.com.br
28 / 75