Kodak EasyShare M1073 IS Extended User Manual page 52

Troubleshooting
If...
Stored pictures are
corrupted.
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Picture is too light.
Picture is not clear.
Picture is too dark.
46
Try one or more of the following
I
Retake pictures. Do not remove card while the camera is accessing it.
Keep rechargeable batteries charged.
I
Transfer pictures to the computer (see
in the camera (see page
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Check the image storage location setting
I
Transfer the picture to the computer (see
card in the camera
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Decrease Exposure Compensation (see
I
Turn off the flash, then move back from the subject.
I
Clean the lens (see page
I
Make sure your camera is not in Close-up mode.
I
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
I
Place the camera on a flat, steady surface or use a tripod.
I
Turn on the flash (see
I
Move so that the distance between you and the subject is within the
effective flash range
I
Use Fill flash (page
the subject.
I
Increase Exposure Compensation (see
33).
(see page 33).
55).
page 8).
(see page 54).
8) or change your position so light is not behind
www.kodak.com/go/support
page 37), then format the card
(see page 31).
page 37), then format the
page 35).
page 35).