Kodak EasyShare M1073 IS Extended User Manual page 35

Using the capture plus tab
Press Menu,
and OK to access settings
White Balance
Choose your lighting
condition.
Face Detection Capture
Choose if faces get focus
priority.
Exposure Metering
Evaluate light levels at specific
areas of a scene.
www.kodak.com/go/support
, ,
Auto—automatically corrects white balance. Ideal for general
picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs.
Ideal for indoor pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—for pictures in shade in natural lighting.
On—In Auto mode (and in SCN modes designed for pictures
of people), the camera attempts to focus on faces.
Off
Multi-Pattern—evaluates lighting conditions throughout
the image to give an optimum picture exposure. Ideal for
general picture taking.
Center-Weight—evaluates the lighting conditions of the
subject centered in the lens. Ideal for backlit subjects.
Spot—similar to Center-weighted, except the metering is
concentrated on a smaller area of the subject centered on the
LCD. If used with Selectable AF zones, the exposure spot
follows the focus zone. Ideal when you need an exact exposure
of a specific area in the picture.
Doing more with your camera
Options
29