Using The Lna(Low-Noise-Amplifier) Feature; How To Set Pip/Twin - Hyundai Q320 User Manual

Using the LNA(Low-Noise-Amplifier) Feature

If the reception is clear, users don't have to use this feature.
If the signal is weak or distorted, try the followings.

How to Set PIP/TWIN

This is to set PIP(Picture In Picture) or Twin Picture mode.
You can watch two programs or source at the same time.
"Swap" function is not supported in
PDP TV OSD menu.
"Twin" function is not supported in
HDMI model.
1 Press MENU button.
Menu items appear on the screen.
Press button to select "CHANNEL" Icon.
2
"AUTO PROGRAM" is highlighted.
3
Press / buttons to move to "LNA".
4
Press / buttons to set to ON/OFF .
Press EXIT button to TV viewing or press MENU button to return to the previous
5
menu.
This function is not supported in HDMI model.
1 Press Menu button.
Menu items appear on the screen.
2
Press Up and Down buttons to move to "Function" icon.
Press button to select "Function".
3
"PIP/TWIN" is highlighted.
Press button to select "PIP/TWIN".
4
New Menu items appears, then "MODE" is highlighted.
Press button, then the menu changes in the following order.
5
PIP TWIN OFF
How to Directly Turn PIP FUNCTION ON/OFF : Press PIP button.
TWIN : To watch two screens in half and half.
PIP : To watch the Sub screen in the main screen at once.
<PIP>
After setting this, go to step 6 to set the SOURCE.
Channel Setup
<TWIN >
36