Advertisement
Insert the 2 x AAA (600mAh/1.2V) Ni-MH re-chargeable batteries
supplied, observing the correct polarity.
CAUTION : PLEASE DO NOT USE ALKALINE OR NON-
RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT
DAMAGE TO THE UNIT AND VOID THE WARRANTY.
Replace the cover on the battery compartment, press to release latch and pull the battery
door upwards. Place the handset in the base station.
Note: To ensure the battery charging properly, clean the charging contacts on the
handset and charger with a soft, dry cloth once a month. Clean more often if the unit is
subject to grease, dust or high humidity.
Advertisement
