Hypertec HYNEP61056 User Manual

Cardbus modem 56k card

Advertisement

Quick Links

CardBus 10/100 TX M56
HYNEP61056

USER GUIDE

Information in this document is subject to change without notice. All
rights reserved. All brand names are registered trademarks of their
respective companies.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYNEP61056 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hypertec HYNEP61056

  • Page 1: User Guide

    CardBus 10/100 TX M56 HYNEP61056 USER GUIDE Information in this document is subject to change without notice. All rights reserved. All brand names are registered trademarks of their respective companies.
  • Page 2: European Community (Ec) Electromagnetic Compatibility Directive

    Otherwise, the telephone company may temporarily disconnect service. CardBus 56k Modem repair can only be performed by Hypertec. It is the responsibility of the user to report the need for any service of the device to Hypertec or to one of our authorised agents.
  • Page 3 What to do if interference occurs Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of Subpart B of the FCC Rules.
  • Page 4 ©1998 Hypertec, Ltd. All rights reserved.
  • Page 5 The Hypertec CardBus 10/100 TX M56 Card is compliant with the OnNow Network Device Class Power Management Specification, the PCI Power Management Interface, and the ACPI Specification. The Hypertec CardBus 10/100 TX M56 Card supports all PC 97 Design Guide and the PC 98 Draft Design Guide network device class requirements.
  • Page 6 • operation Full Duplex. Independent receive and transmit circuits allow full duplex • operation at both 10 Mbps and 100 Mbps, allows for maximum throughput of 200 Mbps A single RJ-45 female connector supports both 10 Mbps and 100 Mbps •...
  • Page 7: Static Electricity Warning

    Static Electricity Warning Static electricity is accumulated naturally in the human body, and can be discharged through electrical components by touching them. This shock can potentially cause permanent internal damage to the component. When installing the adapter, please observe the following precautions: Discharge yourself before commencing by touching a grounded metal appliance, such as the metal frame of a computer - while it is tuned off, but still plugged into the wall socket.
  • Page 8: Specifications

    SPECIFICATIONS Interface Standards: 32-bit CardBus PC Card, 3.3V PC Card Software Support: Card and Socket Services Direct Enablers Weight: 92 gr., 3.3 oz (including the media unit) PC Card Size: Length – 3.37" (85 mm) Width - 2.13" (54 mm) Thickness - 0.197"...
  • Page 9 Fax Rates: CCITT V.17 (14,400 bps) CCITT V.29 (9,600 bps) CCITT V.27ter (4,800 bps) CCITT V.21 channel 2 (300 bps) Video-ready modem interface (VRM): CCITT V.80 Data Compression: CCITT V.42bis (up to 4:1 compression ratio) MNP5 (up to 2:1 compression ratio) Error Correction: CCITT V.42 LAPM MNP 2-4...
  • Page 10: Product Warranty

    Hypertec Limited warrants the hardware components of the product to be in good working order for the life of the product from the date of purchase of the product from Hypertec or an authorised Hypertec dealer. Should the hardware components of the product fail to be in good working order at any time, Hypertec will, at its option, repair or replace the product.

Table of Contents