Related Manuals for Hypertec HyperNet HYNEP61001
Summary of Contents for Hypertec HyperNet HYNEP61001
-
Page 1: User Guide
HyperNet PCMCIA 10/100 TX HYNEP61001 USER GUIDE Information in this document is subject to change without notice. All rights reserved. All brand names are registered trademarks of their respective companies. - Page 2 HYPERTEC. HYPERTEC reserves the right to make modifications to the product without notification. Hypertec is a trademark and the Hypertec logo is a registered trademark of HYPERTEC.
- Page 3 INTRODUCTION Overview The HyperNet PCMCIA 10/100 TX network interface card is a dual speed (10/100) high performance PC Card that allows PCMCIA equipped portable computer users to enjoy high throughput in both, the existing legacy 10Mbps (10BASE-T) and newer100Mbps (100BASE-TX) Ethernet networks.
- Page 4 INSTALLATION Checklist Your package should contain the following items: One HyperNet PCMCIA 10/100 TX Card One 3.5" driver disk One media coupler cable If you do not have each of these items, contact your supplier before proceeding further. Static Electricity Warning Static electricity is accumulated naturally in the human body, and can be discharged through electrical components by touching them.
-
Page 5: Hardware Installation
To remove the media coupler from the card, gently squeeze the plastic clip depressors located on the coupler and separate it from the card. Never disconnect the HyperNet Card by pulling on the cable. If at any time during installation you experience difficulties, please contact Hypertec Technical Support on +44 1488 686844 (01488 686844 in the UK). -
Page 6: Specifications
SPECIFICATIONS Interface Standard: Type II PCMCIA PC Card PCMCIA Software Support: Direct Enablers Weight: 42.7 g, 1.5 oz (including the RJ-45 connector) PCMCIA Card Size: Length - 3.37" (85 mm) Width - 2.13" (54 mm) Thickness - 0.197" (5 mm) Power Consumption: 100BASE-TX: 230mA typ., 270 mA max, 3.3 VDC 10BASE-T : 160Ma typ., 200 mAmax, 3.3 VDC... -
Page 7: Product Warranty
Product Warranty Hypertec Limited warrants the hardware components of the product to be in good working order for the life of the product from the date of purchase of the product from Hypertec or an authorised Hypertec dealer. Should the hardware components of the product fail to be in good working order at any time, Hypertec will, at its option, repair or replace the product.
Need help?
Do you have a question about the HyperNet HYNEP61001 and is the answer not in the manual?
Questions and answers