1. Manuals
  2. Brands
  3. Canvys Manuals
  4. Monitor
  5. MD-DFM24-ENDO
  6. User manual

Canvys MD-DFM24-ENDO User Manual

24-inch (61.1cm) color lcd display
Hide thumbs
Table of Contents

Advertisement

Quick Links

Display User's Manual
Conformity according to the Council Directive 93/42/EEC concerning Medical
Devices.
Use this product after carefully reading this Manual and understanding the
contents.
Store this manual with care, as close as possible, so that you can read
whenever necessary.
Thank you for purchasing our color LCD
Display.
◆ Carefully read this User's Manual and use
the product properly. Before using it, also
read "Safety Precautions."
◆ Keep the User's Manual as close to you as
possible and in safe custody.
◆ If you have lost the manual, contact your
dealer. We will reissue a manual.
◆ The names of companies and products are
registered brand names or brand names.
MD-DFM24-ENDO
24-inch (61.1cm) Color LCD Display
Contents
1
4
6
7
8
9
10
12
36
37
38
40

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD-DFM24-ENDO and is the answer not in the manual?

Questions and answers

Related Manuals for Canvys MD-DFM24-ENDO

Summary of Contents for Canvys MD-DFM24-ENDO

  • Page 1: Table Of Contents

    Display User's Manual MD-DFM24-ENDO 24-inch (61.1cm) Color LCD Display Conformity according to the Council Directive 93/42/EEC concerning Medical Devices. Use this product after carefully reading this Manual and understanding the contents. Store this manual with care, as close as possible, so that you can read whenever necessary.

  • Page 2: Revision History

    Revision History The revision letter changes with related comments each time the document is updated. Revision Comment Initial release of this document...

  • Page 3: Safety Precautions

    Safety Precautions I CAUTION Symbol Description Caution!-This symbol alerts you to important operating considerations or a potential operating condition that could damage equipment. Refer to user's manual or operation's manual for precautionary instructions. II CLASSIFICATION MEDICAL EQUIPMEN T WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARD S ONLY IN ACCORDANCE WITH UL60601-1 AN D CAN/CSA C22.2 NO.601.

  • Page 4: Fcc Information

    V FCC FCC Information FCC(U. S. Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 5 ● If your LCD monitor uses an AC/DC Adapter: Only use the Adapter, which accompanied with this device. Use of another AC/DC Adapter may cause a malfunction or danger. ● If your LCD monitor does not operate normally-in particular, if there are any unusual sounds or smells coming from it-unplug the AC cable immediately and contact the manufacturer, authorized or service center.

  • Page 6: Equipment Symbols

    Equipment Symbols Electrical and Electronic Equipment Symbols In addition to the equipment symbols described in your user's manual, the following symbols may be appear on the monitor. Alternating current. Direct current. European Union Declaration of Conformity. FCC. USA only. Complies with applicable US government (Federal Communications Commission) radio-frequency interference regulations.
  • Page 7 This symbol indicates that the waste of electrical and electronic equipment must not be disposed as unsorted municipal waste and must be collected separately. Please contact an authorized representative of the manufacturer for information concerning the decommissioning of your equipment ATTENTION: Consult accompanying documents.

  • Page 8: Cleaning Instructions

    Cleaning Instructions Cleaning Instructions Using a spray applicator, apply any of the approved liquids from the list below and use a soft lint free cloth to clean the screen. 1. Water 2. Windex Blue (glass surfaces only) 3. Clorox Bleach (Active Ingredient: 5.25% Sodium Hypochlorite-Off the Shelf) Mix 10:1 with H2O 4.

  • Page 9: Disposal Of The Unit

    Disposal of the Unit ●Do not dispose of this product with general wastes. ●Follow your local regulations or rules upon dispose of this product. ●Hg WARNING This product consists of devices that may contain mercury, which must be recycled or disposed of in accordance with local, state, or country laws.

  • Page 10: Application And Function Description

    The light reflects on the display, dazzling you, and you will have problems seeing the displayed information. After unpacking the display, check whether the shipment is complete and all items are intact: MD-DFM24-ENDO • User's Manual • External power supply SNP-A159 • DVI cable •...
  • Page 11 Explanation of Symbols Used On The Devices, Safety Information Explanation of information and symbols on the monitor nameplate. Illustration- Type Rate Label of the Display Manufacturer: Canvys – Visual Technology Solutions A Division of Richardson Electronics GmbH Raiffeisenstraße 5 D-78166 Donaueschingen Tel.: +49 (0) 771 / 8300-0...
  • Page 12 General Notes on Electrical Safety Explanation of information and symbols on the monitor nameplate. Connecting medical electrical equipment to other medical electrical devices and/or other non medical electrical devices, be it for diagnostic or therapeutic purposes or for monitoring, creates a medical electrical system. The standard EN 60601-1-1 and cUL 60601 describes the requirements for these systems.

  • Page 13: Safety Information

    Safety Information DANGER: Explosion Hazard – The display including the power supply is not designed for use in areas of medical locations where an explosion hazard may occur. In appropriate usage of flammable anesthetics, skin cleansing agents and disinfectants the medical Displays can be used risk less in surgical rooms and intensive care units.
  • Page 14 WARNING: Equipment Failure — Magnetic and electrical fields are capable of interfering with the proper performance of the devices. For this reason make sure that all devices operated in the vicinity comply with the relevant EMC requirements. X-ray equipment, MRI devices, radio systems, and cellular telephones are possible sources of interference as they may emit higher levels of electromagnetic radiation.
  • Page 15 EC declaration of conformance: EC Declaration of Conformity Manufacturer Richardson Electronics GmbH Division Canvys Raiffeisenstraße 5 Tel.: +49 (0) 771 / 8300-0 D-78166 Donaueschingen Fax: +49 (0) 771 / 8300-80 Product: Medical Monitor (product group 1) MD-DFM24-ENDO Classification: (Directive 93/42/EWG) We declare in own responsibility, that the above named products correspond to relevant regulations according to the following EG guidelines and standards.

  • Page 16: Features

    Features ●24-inch LCD display with 2.3 million pixels This color LCD display has a multi-scanning function corresponding to the resolution from VGA 640 x 400 to WUXGA 1920 x 1200. This is also compliant with VESA standard display mode. ●High-intensity, high-contrast Beautiful and clear images of the brightness of 400 cd/m and contrast ratio of 1000:1 have been achieved.

  • Page 17: Connection Method

    Connection Method 1. Confirm that your computer is off. Then, confirm that the main switch of the color LCD monitor is off. Caution ●Disconnect Device-The following component is considered the equipment disconnect device "AC Power Inlet" ●Make sure you use the auxiliary AC Adapter.: Type SNP-A159.
  • Page 18 3.Connect Video signal Cable (for video device output) Connect S-Video connector of the LCD monitor and an S-Video output device with the attached S-Video cable. For composite signal connect the BNC connector of the monitor and a composite video output device with the composite video cable. 4.Connect component Video connector of the LCD monitor and a component Video output device with the component video cable.

  • Page 19: Adjustment Method

    Adjustment Method Names and Functions of Each Part ① Touch key Power ON/OFF ・Pressing “Power” key turns on the LCD display. ・Pressing “Power” key for more than three seconds turns the power off. OSD control ・When “Menu” key is pressed while images are on screen, OSD* will appear on screen. *OSD stands for on-screen-display.
  • Page 20 ⑤ Component/RGBS input/output connector When using component input to watch a DVD, HD (High Definition) or RGBS video image, The attached component video connector cable is connected to this and a component output video device. ⑥ S-Video input/output connector S-Video signal input. The attached S-Video signal cable is connected to this and an S-Video output video device.
  • Page 21 Mounting The Monitor can be mounted onto the wall or stand. If you intend to mount the monitor on the wall, we strongly recommend that you use wall mount kits with attached M4*10mm screws and can load more than monitor weight, that you ensure it is securely and safely installed.

  • Page 22: Osd Display

    Charts of OSD Adjustment Functions The charts displays the function tree and brief explanations of the functions.Color,LCD,and other adjustments have submenus under each tree. ● OSD display Main menu display • Exit Close the OSD screen • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •...
  • Page 23 • Multi-PIP Settings Exit Return to Main Menu • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • PIP mode Select PIP mode to Off or PIP or POP •...
  • Page 24 New Timing Search Exit Return to Exit of Management Settings page • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Execute Execute New Timing Search that wasn’t in the preset timing table •...
  • Page 25 Load Exit Return to Exit of Preset Save of OSD Misc. • • • • • • • • • • • • • • • • User 1 Load all adjust settings from User1 • • • • • • • • • • • • User 2 Load all adjust settings from User2 •...
  • Page 26 Charts of OSD Adjustment Functions The charts displays the function tree and brief explanations of the functions. Color, LCD, and other adjustments have submenus under each tree. Detail of Adjustment Items Exit Close the Main Menu. In addition, this page will show below messages: (1)Information for input timing of Main channel .

  • Page 27: Image Settings

    Image Settings Adjust values of below items for Main channel. Beside VideoSetup that only support on S-video & CVBS & YPbPr/PCbCr & RGBS & SDI. Notice: VideoSetup will be disable under Analog VGA or Digital or HDMI source. Exit Return to Main Menu. Auto Setup When you press ‘’Auto Setup’’...
  • Page 28 Saturation Adjust the saturation for the Main channel by the range from 0 to 100. Adjust the hue for the Main channel by the range from 0 to 100. Sharpness Adjust the sharpness for the Main channel by the range from 0 to 24. Sharpness Display Adjust the Horizontal &...

  • Page 29: Color Temp

    • Clock Adjust the frequency sampling rate of horizontal pixels for Main channel, to equal the video source’s value,Thus minimizing artifacts of shimmering vertical lines. Notice: Only support on Analog VGA source. • Phase Adjust ADC sampling clock phase for Main channel, so that the screen image appear crisp and focused.
  • Page 30 • Exit Return to Exit of Color Mode Settings page. • Cool Blueish white used for general use. • Neurtal White close to natural light mainly used for publishing trade. • Warm Redish white suitable mainly for photo modifications. • User Selecting this control allows you to adjust the Red gain, Green gain and Blue gain individually to match personal preference.
  • Page 31 Gamma Selecting this control allows you to choose which gamma curve that you want. • Exit Return to Exit of Color Mode Settings page. • Gamma 1.8 Set Gamma curve to curve 1.8 • Gamma 2.0 Set Gamma curve to curve 2.0 •...

  • Page 32: Pip Mode

    Multi-PIP Settings Selecting this control allows you to adjust below items settings for Sub channel. Notice: PIP Display & Swap & PIP Picture only active when PIP Mode set to PIP or POP. Exit Return to Main Menu. PIP mode Select PIP mode to Off mode or PIP mode or POP mode as below: PIP source You can select source for Sub channel from Analog VGA, Digital, HDMI, S-video, CVBS, YPbPr/...
  • Page 33 PIP Display Selecting this control allows you to adjust the size and position for Sub channel. • Exit Return to Exit of Multi-PIP Settings page. • PIP Size Selecting this control allows you to adjust the size for Sub channel. Exit Return to Exit of PIP Display of Multi-PIP Settings page.

  • Page 34: Pip Picture

    PIP Picture Selecting this control allows you to adjust the below items settings for Sub channel. • Exit Return to Exit of Multi-PIP Settings page. • Black Level Adjust the black level offset for the Sub channel by the range from 0 to 100. •...

  • Page 35: Auto Adjustment

    Exit Return to Main Menu. Scaling Selecting this control allows you to adjust below items relate to image scaling for Main channel. • Exit Return to Exit of Management Settings page. • Scaling Support Full & Native Mode & Best Fit & Fit Width & Fit Height & Over Screen 6 modes. •...
  • Page 36 New Timing Search This function will auto calculate image according to the input timing data if it wasn’t in the preset timing table and as far as possible to display the image that close to the input new timing. Display a dot on-dot off test pattern or full screen test pattern and press ‘’Execute’’ to get certain display image.
  • Page 37 • Save Timing There are Save & Clear for New Timing Setting. If the user makes any additional adjustment, the video signal (with its adjustments) can be stored as user mode. The next time this video signal is connected and selected , the display recognizes it as one of the user modes and reproduces it with the corresponding adjustments.

  • Page 38: Auto Source

    You also can clear the new timing after you save. 1. Choose clear and entry into the ‘’Clear timing’’ page. 2. Move to the timing that you want to clear then press enter you will see below photo and select ‘’Yes’’...

  • Page 39: Osd Position

    OSD Misc. Selecting this control allows you to adjust below items settings for OSD. Exit Return to Main Menu. OSD Position Selecting this control allows you to adjust position for OSD. • Exit Return to Exit of OSD Misc. • OSD H.Position Adjust the H position for OSD by the range from 0 to 100.
  • Page 40 Language Selecting this control allows you to choose below languages that you want to display for OSD. • Exit Return to Exit of OSD Misc. • English Display OSD in English. • Francais Display OSD in French. • Deutsch Display OSD in German. •...
  • Page 41 Preset Save Selecting this control allows you to save OSD setting after you adjust into five User settings separately. You also can load any one of five user settings for the OSD setting that you adjust then save into five User settings. •...

  • Page 42: Osd Timer

    • Load Load any one of five user settings for the OSD setting that you adjust then save into five User settings. Exit Return to Exit of Preset Save of OSD Misc. User 1 Load all adjust settings to User 1. User 2 Load all adjust settings to User 2.

  • Page 43: Reference

    Reference This unit has loaded a function compliant with DDC-2B, VESA* standard. ◆ The DDC function is located in 15-pin D-sub connector and 24-pin DVI-D connector. This function reads into the set data written in the color LCD display internal device in advance on start-up of Windows®/98/Me/2000 or Windows®XP and sets the detailed information of the color LCD display in the system file in order to achieve Plug &...

  • Page 44: Compatible Signals

    Compatible Signals Applicable Signals Timings ※ The display may not work correctly with timings other than listed below. ◎ : Recommended timing ○ : Applied timing Resolution Frequency Input Signal Input Signal Mode Name H(kHz) V(Hz) Analog Digital 31.47 59.54 ○...

  • Page 45: Specifications

    Specifications Product name :24"Color LCD Display Items Specifications 61.13cm (24inch)Color TFT Normally Black LCD display device Horizontal 0.27mm x Vertical 0.27mm Pixel pitch Display area Horizontal 518.4mm x Vertical 324mm 1920 x 1200 pixels Pixel Display gradation 16.77 billion (8 bit each) x3 Response Time TrR= 6 ms (Typ.) / TrD = 7 ms (Typ.) 1000 : 1 (Typ.)
  • Page 46 (with base) External Dimensions 236.5 (without base) External Dimensions...

  • Page 47: Support And Service

    Support and Service Canvys a Division of Richardson Electronics GmbH, from Donaueschingen / Germany is active in national and international markets. Full application support and service is available. For technical support or service problems, please contact our service team at: Canvys –...
  • Page 48 Repairs Equipment for repair must be returned in the original shipping carton (postage prepaid) to the above service address. RMA number and error description must be included. Please request the RMA number under the following link: http://teklink.rell.com/MRcgi/MRentrancePage.pl After receipt of the equipment for repair we will send you an order confirmation and a cost estimate (for repairs after the warranty period).
  • Page 49 Product Warranty In case of defects, please advise Richardson Electronics GmbH according to the aforementioned RMA Handling Procedures promptly, but no later than 8 days after receipt of goods, or in case of hidden defects no later than 3 days after discovery. The customer has no right to return the goods without prior approval from Richardson Electronics GmbH.

  • Page 50: Contact Information

    Contact Information Manufacturer Canvys – Visual Technology Solutions Tel.: +49 (0)771 / 8300-0 A Division of Richardson Electronics GmbH Fax: +49 (0)771 / 8300-80 Raiffeisenstr. 5 Email:info-europe@canvys.com 78166 Donaueschingen Internet:http://www.canvys.com...
  • Page 51 GEN LCD Display Model : GEN2410LMII...

Table of Contents