Canon PowerShot SD950 IS User Manual page 122

120
I
Various Shooting Methods
Changing the Save Method for the Original Image
When shooting still images in the Color Accent or Color Swap mode,
you can set whether or not to save the original image as well as the
transformed one.
1
Select [Save Original].
1. Press the
e
button.
2. In the [L!J] menu, use the ... or
+
button to select [Save Original].
Accept the setting.
1. Use the • or • button to select
[On] or [Off].
2. Press the
e
button.
[j
W_hen [Save Original] is Set to [On]
Only the transformed image displays in the LCD monitor
while shooting in the Color Accent or Color Swap mode.
The transformed image is reviewed in the LCD monitor
after shooting in
the Color Accent or Color Swap
mode.
If you erase the image at this point, the original image is
erased along with the transformed image. Exercise
adequate caution before deleting a file.
The images are numbered consecutively. The original
images are assigned the lower number and the
transformed color accent or color swap images the next
number.
Since two images are recorded with each shot, the
number of shots remaining is approximately half the
number displayed when this function is set to [Off].