The flashlight charger is designed to allow the flashlight to remain docked,
with no danger of damaging the flashlight.
Note: High Temperature Charging
Your flashlight Charger has automatic temperature overload protection.
Charging in high temperatures (defined as 120 degrees Fahrenheit or more)
will increase charge time slightly. This is normal and will ensure a prolonged
life of your flashlight.
C. Mounting your Flashlight (Automotive Mounting)
1. Select suitable location
for mounting, e.g. the
transmission "hump".
2. Using the attached template,
mark and drill 4 – ¼" holes.
3. Secure the back bracket to
the mounting location using
the screws provided.
4. Turn the power cord so that it
points downward.
5. Remove the flashlight from the charger.
6. Clip the flashlight Charger to the mounting bracket by sliding it upward
and toward the mount wall. (Figure 1) Make sure to push the base of
the charger back until the securing tabs click into place.
7. Insert the plug into the vehicle's cigarette lighter or 12V accessory
outlet.
5