GlucoRx Nexus Voice TD-4280 Owner's Manual page 22

4. Apply the sample
Gently apply the drop of blood to the
absorbent hole of the test strip at a
tilted 45 degree angle. The confirmation
window should be completely filled if
enough blood sample has been applied.
Do NOT remove your finger until you
hear a beep sound.
Do not press the puncture site against the test strip or try to
smear the blood.
If you do not apply a blood sample to the test strip within 3
minutes, the meter will automatically turn off. You must remove
and reinsert the test strip to start a new test.
The confirmation window should be filled with blood before the
meter begins to count down. NEVER try to add more blood to
the test strip after the drop of blood has moved away. Discard
the used test strip and retest with a new one.
If you have trouble filling the confirmation window, please
contact your health care professional or local customer service
for assistance.
24
NOTE