Connecting To The Monitor - Sylvania SDVD8739 User Manual

Connecting To The Monitor

The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor
by a DC/AV cable. Also use this DC/A V cable to connect the AV OUT jack of
the unit to AV IN jack of the Monitor.
Please refer to the illustration below.
SD AV OUT DC OUT
ON OFF
Note: You're advised to supply both units the power by the cigarette lighter
adapter only. The AC/DC adapter is used to supply power of one unit only
and as the charger to charge the main unit if it's with built-in battery.
7