AD Labs RD26 Owner's Manual page 2

AD LABS www.musicaltech.com
1) Input select 1 (AES/EBU);
2) Input select 2 (wireless USB);
3) Input select 3 (spdif);
4) Volume Up;
5) Volume Down;
6) Filter Selection;
7) Headphone output;
8) Numeric display;
9) Remote sensor.
• A long press on active input (buttons 1,2 or 3) will put the unit in standby.
• Normal operation can be resumed by pressing any volume button(4 or 5).
• Pressing the volume buttons at the same time (4 and 5) will change absolute
phase.
• A long press on filter button (6) will switch the output channels.
RD26 Back Panel:
1) RF connector (input);
2) AC supply (230V or 110V);
3) Digital Input - coaxial;
4) Digital Input – AES/EBU;
5) Balanced Output Left;
6) Single ended Output Left (White);
7) Single ended Output Right (Red);
8) Balanced Output Right.
RD26
2