Maintenance And Storage; Maintenance Mode And Maintenance Schedule - North Star MA1573001A.1 Owner's Manual

Maintenance Mode
Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.
1.) Turn off motor and unplug cord.
2.) Turn off water supply.
3.) Squeeze trigger to relieve system pressure.
Maintenance Schedule
What to Check
Inlet Filter
Pressure Hose
Bolts
Pump Oil

Maintenance and Storage

When To Check
Each Use Visually inspect and clean inlet filter with clear water.
Visually inspect pressure hose and hose couplings. Replace hose if
Each Use any of the following is evident:
hose coupling is damaged, wire mesh is exposed or damaged, hose
is permanently kinked or flattened, outer hose cover is blistered or
loose.
Each Use Tighten any loose bolts.
st
After 1 50hrs, Change pump oil. See pump oil change instructions on next page.
then 3mo/500hr
What to Do
9