Table of Contents
Advertisement
Wireless Security
LED Indicators
Power Requirements
Power Input Voltage
Reverse Polarity Protection
Power Consumption
Environmental
Operating Temperature (Standard)
Operating Temperature (Wide Temperature)
Storage Temperature
Operating Humidity
Mechanical
Dimensions(W x D x H)
Casing
Regulatory Approvals
Regulatory Approvals
EMS
Shock
Free Fall
Vibration
APR-2000/APR-2000P User's Manual
802.1X and Radius supported
TKIP encryption
SSID broadcast disable
PWR 1(2) (P.O.E., APR-2000P) / Ready:
1) Red On: Power is on and booting up.
Red Blinking: Indicates an IP conflict, or
DHCP or BOOTP server did not respond
properly.
2) Green On: Power is on and functioning
normally.
Green Blinking: Located by Administrator.
ETH1 (2) Link / ACT:
Orange ON/Blinking: 10 Mbps Ethernet
Green ON/Blinking: 100 Mbps Ethernet
WLAN Link/ACT: Green: Link, Orange: Poor
signal
WLAN Strength:1<25%, 2<50%, 3<75%,
4<100%
Fault: WLAN link down (Red)
PWR1/2: 12 ~ 48VDC in 6-pin Terminal
Block
Present
6 Watts Max
o
-10 to 60
C
o
-35 to 75
C
o
-40 to 80
C
5% to 95%, non-condensing
52 mm(W)x 106 mm( D )x 144 mm(H)
IP-30 protection
CE class A
RoHS
EN61000-4-2 (ESD), EN61000-4-3 (RS),
EN61000-4-4 (EFT), EN61000-4-5 (Surge),
Level 3, EN61000-4-6 (CS), Level 3
IEC60068-2-27
IEC 60068-2-32
IEC 60068-2-6
- 48 -
Advertisement
Table of Contents
