LG WT-H750 Owner's Manual page 27

Table of Contents

Advertisement

2
Checking level
Open the lid and check if the washer is correctly
leveled
5
Confirming level
Place the washer to original position and
confirm the level as in figure 2. (Try to shake the
washer and confirm the level.)
Check the location of the
level in the front of washer.
Caution
• If the appliance is supplied from a cord extension set or multi-outlet power board the core
extension set or multi-outlet power board should be positoined so it is not subject
to splashing or come into contact with water.
How to use the adjusting plates
• Use the adjusting plates to level the washer when the
adjustable legs cannot cover the gap.
3
6
figure 2
Checking slope
Check if installation surface is tilted.
(Try to shake the washer and check if the
washer is firmly installed.)
Distance between drain hose at the rear and
the wall
Distance between drain hose and the wall should
be more than 10cm, and the distance between
the wall and the sides of the washer should be
more than 2cm.
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wt-h755Wt-h650Wt-h655

Table of Contents