LG WT-H750 Owner's Manual page 31

C
onnecting Water Supply Hose
Australian Region
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then
tighten it by screwing it to the right.
Do not use multi levering tools. Hand tighten only,
or use a soft towel to encourage hand grip.
3
Check water leakage.
After connecting the hose at both ends, open the
tap to check for any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
Water
tap
Rubber Packing
Water Supply Hose
Hose connector
Rubber seal
31