Controls And Functions; Front Panel - Yamaha HTR-5635 Owner's Manual

Front panel

1
NATURAL SOUND AV RECEIVER
STANDBY
/ON
SILENT
PHONES
8
1 STANDBY/ON
Turns this unit on, or set it to the standby mode. When
you turn this unit on, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
Standby mode
In this mode, this unit will consume a small amount of
power in order to receive infrared-signals from the
remote control.
2 Remote control sensor
Receives signals from the remote control.
3 Front panel display
Shows information about the operational status of this
unit.
4 INPUT MODE
Sets the priority for the types of input signals (AUTO,
DTS, ANALOG) to receive when one component is
connected to two or more input jacks. Priority cannot be
set when 6CH INPUT is selected as the input source.
4

CONTROLS AND FUNCTIONS

2 3
STEREO PROGRAM
MEMORY
EFFECT
MAN'L/AUTO FM
9 0 q w
INPUT M0DE
TUNING MODE FM/AM PRESET/TUNING PRESET/TUNING
AUTO/MAN'L MONO EDIT
e r t
5 INPUT l / h
Selects the input source you want to listen to or watch.
6 VOLUME
Controls the output level of all audio channels.
This does not affect the OUT (REC) level.
7 6CH INPUT
Selects the audio source connected to the 6CH INPUT
jacks. This audio takes priority over the source selected
with INPUT l / h (or the input selector buttons on the
remote control).
8
SILENT (PHONES jack)
Allows you enjoy DSP effect for private listening with
headphones. When you connect headphones, no signals
are output to the speakers.
9 STEREO/EFFECT
Switches between normal stereo and DSP effect
reproduction. When STEREO is selected, 2-channel
signals are directed to the main left and right speakers
without effect sounds and all Dolby Digital and DTS
signals (except the LFE channel) are mixed down to the
main left and right speakers.
4 5 6
INPUT VOLUME
BASS TREBLE
A/B/C/D/E
– + –
y u i
7
6CH INPUT
+