Camera Addressing - Derrik ACD-1500 Instruction Manual

SW 1 : Camera Address Settings (continued)
When using more than 1 RS-485 device each unit must be given a unique address. Refer to the
chart on the previous page for the value of each dip switch. For each dip switch that is ON the
value/values are added together, the total is the address of that unit.
For Example:
For an address of 1:
For an address of 5:
For an address of 157:
Pan, Tilt and Zoom Dome Camera / ACD-1500
Dip switch #1 (value = 1) will be ON all others OFF
Dip switch #1 (value = 1) & #3 (value = 4) will be ON all others OFF
Dip Switch #1 (value = 1), #3 (value = 4), #4 (value = 8), #5 (value = 16), #8 (value =
128) will be ON all others OFF

Camera Addressing

3
10