Cradlepoint MBR1200B Product Manual page 117

MBR1200B| USER MANUAL Firmware ver. 3.6.0
CRADLEPOINT
Initiation Mode: ―Always On" or ―On Demand.‖ ―Always On‖ is used if you want the tunnel to initiate the tunnel
connection whenever the WAN becomes available. Select On Demand if you want the tunnel to initiate a connection if
and only if there is data traffic bound for the remote side of the tunnel.
Tunnel Enabled: Enabled or Disabled.
MBR1200 Quick Connect: VPN tunnels in the MBR1200B have more choices than they do in the MBR1200, so it is more
complex to configure. Check this box to simplify setup by streamlining your options.
Page 2-3: Local and Remote
7.4.2
Networks
Local Network: The Network Address and
the Netmask define what local devices have
access to or can be accessed from the VPN
tunnel. The MBR1200B will automatically fill
in the values for your network, but you can
change the values to limit the tunnel to only
some of the devices in your network.
NOTE: The local network IP address must be
different from the remote network IP address.
Remote Network: Enter the remote
Gateway's IP address or fully qualified
domain name (my.domain.com). It is
recommended you use a dynamic DNS host
name instead of the static IP address. By using the dynamic DNS host name updates of the remote WAN IP are
compensated for while connecting to a VPN tunnel.
Enter the Network IP address with the Subnet Mask to define the remote network subnet that the local devices will have
access to.
NOTE: The remote network IP address must be different from the local network IP address.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 115