Nokia N97 mini User Manual page 133

profiles, view existing software version and device
information, or view and manage existing server profiles.
If software updates over the air are supported by your
network, you may also be able to request updates through
the device.
You may receive server profiles and different configuration
settings from your service providers and company
information management department. These configuration
settings may include connection and other settings used by
different applications in your device.
To connect to the server and receive configuration settings
for your device, select Options
and Options Start configuration.
>
To create a server profile, select
profiles Options New server
> >
To delete a server profile, select the profile and
Delete.
To check for software updates, select
updates.
Warning:
If you install a software update, you cannot use the device,
even to make emergency calls, until the installation is
completed and the device is restarted. Be sure to back up data
before accepting installation of an update.
© 2009 Nokia. All rights reserved.
Server profiles, a profile,
>
Options Server
>
profile.
Options
Options Check for
>
Downloading software updates may involve the transmission
of large amounts of data (network service).
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Security settings
Phone and SIM
Select Menu Settings
>
Security settings
Select from the following:
PIN code request — When active, the code is requested each
time the device is switched on. Deactivating the PIN code
request may not be allowed by some SIM cards.
PIN code, PIN2 code, and Lock code — You can change the
PIN code, PIN2 code, and lock code. These codes can only
include numbers from 0 to 9. Avoid using access codes similar
to the emergency numbers to prevent accidental dialling of
the emergency number. If you forget the PIN or PIN2 code,
>
contact your service provider. If you forget the lock code,
contact a Nokia Care point or your service provider.
Phone autolock period — To avoid unauthorised use, you
can set a time-out after which the device automatically locks.
A locked device cannot be used until the correct lock code is
entered. To turn off the autolock period, select None.
Lock if SIM card changed — You can set the device to ask
for the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that are
recognised as the owner's cards.
Remote phone locking — Enable or disable remote lock.
and Phone Phone mgmt.
>
Phone and SIM card.
>
>
133