Advertisement
T
TCA-500 C
ELONICS
(C
ONTINUED
• Overload LED indicator.
• Master Wet/Dry fader control – controls internal effects and parallel EFX loop.
• Built-in "TBro" effect with remote control jack.
• Pedal Switch jack on rear panel allows switching "TBro" and Reverb remotely.
• Special "Blend" EQ control for personalizing your tone or adjusting for venue. (Once
properly adjusted, Master volume and Blend are generally the only adjustments used).
• Auxiliary AC power outlet, switched with main power switch.
• Special Power On/Off circuit to minimize "pops" and speaker damage.
• Built in high output headphone amp with separate volume control.
• Super quiet Mute circuit with LED indicator.
• Digital Thermal Management System.
• 24 volt DC jack to power Telonics 24 VDC FP-100 foot pedal.
• Balanced XLR Direct stereo output for stage and studio use. Includes ground lift switch.
• Analog modeling for Direct Out for live venue or studio use, with preset modeling.
• Buffered tuner output (jacks on both front and rear panels) - active full-time, even when
mute is ON.
• Auxiliary stereo input (on rear panel) for home practice or solo gigs with front panel level
control. For CD/mp3 players or for use as a second effects RETURN. Also routed to DI
for recording.
• Front Mounted Power Amplifier On/Off switch for preamp-only use in Studio.
• Highest Quality Telonics NEO Speaker (12 or 15 inch).
• 1U rack space provided which may be used for EFX Units, tuners, etc.
• Built-in cabinet-wide LED lighting for low light venues with back panel switch to control
On/Off and brightness level.
• Highly abrasion-resistant outer surface, durable Baltic Birch plywood construction
throughout. Made for years of trouble free use.
• International versions available for export.
• Proudly made in the U.S.A. by musicians and engineers.
Telonics TCA-500 Combo Amp
PB-009289 Rev _ PRELIMINARY
A
OMBO
MP
)
F
:
EATURES
4
Advertisement
