Set The Sleep Timer; Play From An External Device; Headphone - Philips MCD1060 User Manual

To deactivate or re-activate an alarm timer
1
Press to switch to standby mode.
2
Press TIMER/SLEEP repeatedly to activate
or deactivate timer.
» If timer is activated,
» If timer is deactivated,
Note
‡
In MP3 link mode, the timer cannot be set.
‡
If disc/USB source is selected and the audio cannot be
played, tuner is activated automatically.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
When the unit is turned on, press TIMER/
SLEEP repeatedly to select a set period of time
(in minutes):
‡ [60 SLEEP]
‡ [45 SLEEP]
‡ [30 SLEEP]
‡ [15 SLEEP]
» When sleep timer is activated,
displayed.
To deactivate sleep timer
Press TIMER/SLEEP repeatedly until [OFF
SLEEP] (off sleep) is displayed.
» When sleep timer is deactivated,
disappears.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
18 EN
is displayed.
disappears.
is
2
Connect an MP3 link cable to:
‡ the MP3 LINK connector (3.5mm) on
the unit.
‡ the headphone connector on an
external device.
3
Start to play the device (see user manual
of the device).

Headphone

Plug headphones (not supplied) into the
connector on the unit to listen through the
headphones.