Precautions 1. Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. ...
3. Copyright This manual is protected by copyright laws. Copying and/or reproduction of this manual in part or whole without Ultraplus's prior written approval is prohibited. 4. Disclaimer The manufacturers, distributors and agents are not liable to any kind of damage caused by the use of the information contained in this manual.
Before You Begin 1. Main Features Twin Tuner HDTV PVR Receiver ( H.264/ MPEG4 HD ) Supports MPEG4 /MPEG2 - HD/SD, DVB-S2 /DVB-S Embedded Linux OS & Ethernet port Time Shifting, Recording & Playback with Internal HDD (SATA) / External HDD (USB 2.0) ...
Hardware Description 1. Front Panel Configuration POWER BUTTON & LED : Press to switch between STANDBY and POWER ON modes. Navigation Button : Up/Down button(CH Up/Down) : Press to change services in normal mode, or to move highlighted- bar in menu mode. Left/Right button (Vol Up/Down) : Press to change audio volume in normal mode or to navigate menu in menu mode.
2. VFD(Vacuum Fluorescent Display) 1. Remote Indication LED : The LED lights when a key on the Remote Controller is pressed. 2. Radio icon : The icon lights when the radio service is changed. 3. TV icon : The icon lights when the TV service is changed. 4.
3. Rear Panel Configuration 1. LNB IN_1 Satellite signal input socket for the first tuner. Connects to a satellite antenna cable. 2. LNB OUT_1 Satellite signal output socket through the first tuner. Connects to the LNB IN_2 for loop-through. 3. LNB IN_2 : Satellite signal input socket for the second tuner.
Universal TV : Change the mode of the remote to allow it to control the TV. b. STB : Change the mode of the remote to allow it to control the Ultraplus F-9000HD. c. Universal DVD : Change the mode of the remote to allow it to control the DVD player.
Page 13
6. Color Buttons a. RED : Used for special functions in the menu. The RED key is used to sort lists in the service list or go to previous day search in EPG or make/delete the current position as a bookmark. b.
Page 14
15. Volume Up & Down : To change the Volume. 16. Channel Up & Down: To change the channel. 17. EPG(Electronic Program Guide) : Show the TV/Radio program guide. 18. Play List : To show the file list for the SATA HDD or USB Storage Device. 19.
5. Multi-Brand IR Remote Controller Setting NOTE : If there is no input during the first 10 seconds of set mode, set mode is canceled. 1. Direct Code Entry Step 1 : Turn on the DEVICE what you want to set up(TV / DVD / VCR) Step 2 : Press DEVICE and OK buttons for about 2 seconds simultaneously.
Connections Diagram 1. Receiver to TV with Digital A/V Output Connect the satellite antenna cable to LNB IN. Connect the HDMI Cable to HDMI Connector of TV. Connect SPDIF to Digital audio input of the equipment(Digital Audio) NOTE : Depending on the A/V equipment you own, there are various ways you can connect the STB.
2. Receiver to TV With Analog A/V Output Connect the satellite antenna cable to LNB IN. Connect the TV SCART to SCART of TV. Connect the VCR SCART to SCART of VCR. Connect the Component to Component of TV. ...
3. Receiver to TV and VCR Connect the satellite antenna cable to LNB IN. Connect the TV SCART to SCART of TV. Connect the VCR SCART to SCART of VCR. 4. Connecting to Dish Connecting by Loop through...
Guide of Functions 1. Selecting a Service To select the desired service (channel), please refer to the instructions below. 1.1 Using CH UP/DOWN buttons You can navigate between services by pressing CH UP/DOWN buttons. Whenever you press the CH UP(DOWN) button, current service will be changed to next/previous service. Please press CH UP or CH DOWN button until you fine the service you want to watch.
1.4 Using Recent Service List To return to the previous service that you were watching, press RECALL button for a short time. To display recent service list, press the RECALL button for a little bit longer time. To chose the service from the recent service list, use the ARROW button to select, then press the OK button.
Press the EPG button, then the EPG menu will be displayed. Use the ARROW buttons to move to other services or to see previous/next guide. Press the EPG button once to view full EPG with multi service list, and press it twice to view the additional EPG information of a specific channel service.
The subtitle will be displayed in the selected language at the bottom of the screen. To turn OFF the subtitle from the screen, Select ‘Off’ from the subtitle language list. NOTE : When program does not provide subtitle information, SUBTITLE button is not active. 9.
Page 24
In the PIP mode, you can change primary and sub with the PIP SWAP button. If you press the PAGE UP/DOWN button, the location of the sub picture is changed. If you press the PIP SERVICE LIST button, you can see the list of services of sub picture.
PVR (Personal Video Recorder) Function 1. Recording You can select a recording storage device with the following sequence : Menu > Configuration > Recording Option > Record Device. Default is set to ‘Hard Disk’. 1.1 Recording methods There are 3 type recording methods. (Instant Recording / Time Scheduled Recording / Event Scheduled Recording).
Page 26
Event Scheduled Recording via EPG : In the EPG menu screen, you can choose the event you wish to schedule or record. - While watching the LIVE TV screen, press the EPG button to access the EPG menu screen. - Go to the event which you wish to view at the time indicated on the EPG schedule, then press OK.
1.2 Recording Edit Press the REC button while recording to see the recording message window. Pause : Select Pause Recording then press OK to pause the current recording process. Duration : Set recording duration. Press LEFT/RIGHT ARROW button to change recording duration. ...
Page 28
During recording, press the PLAY/TIMESHIFT button to show the Play bar screen. While the Play bar is shown on your screen, you may use the LEFT/RIGHT ARROW button to move (forward & backward) freely within recorded time. If you press the STOP button, it will go to LIVE and you may press PREV FILE button to view the recorded file from the beginning.
2. Time Shifting You can select a storage device for a temporary file of the Time shifting with the following sequence: Menu > Configuration > Recording Option > TimeShift Device. Default storage device is set to ‘Hard Disk(SATA)’ If pressing the PAUSE button during Time shift, the live video is paused but the temporary recording for time shift is continued at the selected storage device.
3. Playback (Play List) You can playback many files with the Playlist which you access by the PLAYLIST button. In the Playlist, you can check and playback recorded files, multimedia movie files, MP3 music files, and image files. With the LEFT/RIGHT ARROW button, go to the Recorded Files, Imported Files, Music and Photo category and check &...
3.2 Imported Files If you press RIGHT ARROW button in Recorded Files, you can go to Imported File menu. Locate the file(s) you wish to play with the UP/DOWN button and press the OK button to enjoy the movie. ...
When the play bar is on, user can move / jump between the bookmarks by pressing the GREEN button. If you wish to delete any Bookmarks, go to that bookmark by pressing the GREEN button, then press the RED button to delete the current bookmarks.
Menu Map Main Menu 1. Storage Manager 2. Timer Settings 3. Service List Manager 4. Data Transfer System Tools 1. Recording Option 2. Parental Control 3. Display Setting 4. Time Setting 5. Language Setting Configuration 6. A/V Output Setting 1. Dish Setting 2.
Main Menu of Guide To display the menu, press the MENU button at any time. You can select the sub menus by using the ARROW buttons. The selected sub menu becomes highlighted. After selecting (highlighting) the sub menu you want to access, press the OK button.
1.3 Service List Manager Service List Manager menu will appear when you press the OK button. You can select Edit Mode by pressing the YELLOW button. Lock Services : All service lists will be shown on the left side of the window, the middle will show the list of service to be locked.
Set Favorite Services : Use the ARROW and OK buttons to select your desired favorite group. Once, favorite group is chosen, the left side window will show all service lists and the middle window will only show the selected services of the favorite group selected.
2. Configuration 2.1 Recording Option Recording Stop Message : - Set 'On' : When you press the STOP button while recording, then a confirmation window is displayed. - Set 'Off' : When you press the STOP button while recording, the STB will stop the recording process immediately / instantly with no extra confirmation message.
2.3 Display Setting Info Box position : Set a position of the information window. Info Box Display Time : Set the time duration of the information window being displayed on the screen after changing services. Volume Bar Display Time : Set the time duration of the volume bar being displayed on the screen after changing audio volumes.
Audio Language : Select the default language for the audio when changing services. If no other language is provided, then the default language of current will be automatically selected. Subtitle Language : Select the default language for subtitle when changing service.
3. Installation 3.1 Dish Setting Select the satellite/antenna and LNB settings for service search. The values that are set in this menu will be available for selection in other service searching menus. Satellite : Select the satellite which you want to do a search for.
3.2 Positioner Setting Satellite : Select the satellite which you want to search for the Service. - Press the LEFT/RIGHT ARROW button to select the satellite. - If you press the OK button, a complete satellite list will be displayed.
Page 42
Manual Search Mode : - Satellite : Press the OK button to select the target satellite for search. - Tuner : Select the tuner which you want to use (Tuner 1/ Tuner 2). If you set ‘Loop-Through’ on the menu (Installation-Dish Setting-Tuner Connection), this menu (Tuner) will be automatically disabled.
3.4 Network Setting To use a Network connected to the STB Ethernet port, you have to prepare the STB Network settings. When the STB and a PC are connected via a network, you can access the files of the STB storage device such as the SATA Hard Disk Drive (HDD) or USB storage device.
4. Utilities 4.1 Calculator To use the calculator, highlight the calculator and press the OK button. 4.2 Calendar To display the calendar, highlight the calendar and press the OK button. Utilize the ARROW buttons to choose the date. If you press PAGE UP/DOWN button, you can see the past/next month of the calendar.
Troubleshooting Problem Solution Check the main power cable and check that it is plugged into a Does not display any message suitable power outlet. on the front panel. Check the STB main power switch is ‘ON’ at the rear of the STB. ...
Specifications Tuner & Channel Decoder Input Connector F-type, IEC 169-24, Female Loop through out F-type, IEC 169-24, Female Frequency Range 950MHz ~ 2150MHz Input Impedance 75Ω, unbalanced Signal Level -65 to -25dBm LNB Power 13/18VDC, max.400mA 22KHz Tone (22±2)KHz, (0.6±0.2)V DiSEqC Control V1.0/1.2/USALS Compatible Demodulation...
Page 47
Audio / Video & Data IN/OUT TV SCART RGB, Y/C, CVBS Video, Audio L, R Output VCR SCART CVBS Video, Audio L, R Output RGB Video input, CVBS Video, Audio L, R Input CVBS Video Output, Audio L, R Output Component YPbPr Video Output HDMI...
2. TV Brands TV Brands Code ADMIRAL AKAI ALBA ALBIRAL ALCATEL AMSTRAD ANAM ARC EN CIEL ARISTONA ARTHUR MARTIN ATLANTIC AUDIOSONIC AUSIND AUTOVOX BAIRD BASICLINE BAUR BEKO BLAUPUNKT BRANDT BRION VEGA BRUNS BUSH CENTURY CIHAN CLARIVOX CONDOR CONTEC CONTINENTAL EDITION CROSLEY CROWN CTC CLATRONIC...
Need help?
Do you have a question about the F-9000HD PVR and is the answer not in the manual?
Questions and answers