Introduction This series of MCM Custom Audio In-Ceiling common in ceiling/floor cavities and attics. Speakers is the culmination of: The back-box shape, internal damping material and internal volume were carefully • calculated to provide optimum low frequency Years experience performance with the 6½" woven fiberglass commercial and residential sound woofer.
Careful consideration should be made when determining the desired location of the speaker pair. As this Model #50-7325A is referred to as a ceiling speaker, this is the intended mounting location. However, there is no electronic or physical reason these cannot be mounted in other locations, such as walls.
Page 4
(in attic installations). Alternative to Steps 5~7 The MCM Hole Cutter, #22-7385, will complete steps 5, 6 and 7 in one quick step. For complete information to this product, check out our website at www.mcminone.com. Part 2 1.
8. The other end of the speaker wire is now ready for connection to the sound source Warranty MCM Custom Audio products are warranted against manufacturer defects for a period of 12 months from the original date of purchase. This warranty is limited to manufacturer defects, in either materials or workmanship.
Page 6
MCM, an InOne company www.mcminone.com 800-543-4330...
Need help?
Do you have a question about the 50-7325A and is the answer not in the manual?
Questions and answers