Assembling The 3-In-1 Activity Center - Delta Lil’ Assembly Instructions Manual

1
• A ssemble the legs to the base: Press the leg button and insert it into the mounting hole at the base as illustrated (Fig. A, B & C).
NOTE: Legs with square shaped pins enter the square holes at the base. Legs with round shape pins enter the round holes at the base.
• O nce completed, make sure all legs are adjusted to the same height level.
NOTE: Rear legs are keyed to rear tray mounts.
2
• A ssemble Walker Tray to Base:
• C onnect the legs with the walker tray as shown in FIG D.
Then secure the large plastic nuts (x4) onto bolt clockwise as illustrated in FIG F &G.
• Make sure all plastic nuts are fully hand tightened down.
Front
Customer Care
Tel. 1-(800)-377-3777

Assembling The 3-in-1 Activity Center

Front
Round pin
close-up
Back
Walker Top
Base
front
Front
F
Photo diagram of step 2
4
Square pin
close-up
G
www.DeltaChildrensProducts.com