Husqvarna HUV 4421 4421-D/DX/DXL User Manual page 15

Huv 4421 series gas and diesel utility vehicles
Table of Contents

Advertisement

DISCONNECTING THE BATTERY – GASOLINE/DIESEL VEHICLES
1.
Disable the vehicle. See Disabling the Vehicle on page 12.
2.
Disconnect the battery cables, negative (–) cable first, as shown (Figure 2).
3.
Gasoline Vehicles Only: Disconnect the spark plug wire(s) from the spark plug(s).
1. Remove negative battery cable.
2. Remove positive battery cable.
Connect battery cables in reverse order.
188
Figure 2 Battery Cable Removal
CONNECTING THE BATTERY – GASOLINE/DIESEL VEHICLES
1.
Connect the battery cables, positive (+) cable first.
2.
Tighten battery terminals to 80 in-lb (9 N·m).
3.
Coat terminals with Battery Terminal Protector Spray (CCI P/N 1014305) to minimize corrosion.
4.
Gasoline Vehicles Only: Connect the spark plug wire(s) to the spark plug(s).
RECYCLING LEAD-ACID BATTERIES
WARNING
• Lead-acid batteries contain lead (Pb), other metals, acids and other compounds. If improperly handled,
they can contaminate both water and soil, causing environmental damage and personal injury.
Lead-acid batteries are identified by the symbol shown below and should be properly recycled (Figure 4). They cannot
be disposed as municipal waste and must be collected separately. Responsibility for environmental protection must be
shared, not only by the manufacturers of the batteries, but by people who use the batteries as well. Please contact
your nearest Husqvarna dealer or distributor for information on how to properly recycle your batteries.
189
Figure 3 All-Wheel Drive Warning
HUV 4421 Owner's Manual
General Warnings
Page 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents