Table of Contents
Advertisement
8 Special adjustments
Basic functions of the Sennheiser operating menu
With the Soundfield System, all necessary adjustments to the transmitter
and receiver section settings can be made by using the
buttons. The settings are indicated on the respective displays.
Important:
After turn-on, press the
preset fixed frequency memories. The display starts flashing. Your
selection becomes effective immediately. Press the
acknowledge your selection. The flashing stops.
1. Press the
SET
button to enter the top menu level:
By briefly pressing
SET
again, you can change to the next menu.
After approx. one second, the selected menu appears on the display and
then the current setting of the menu is indicated.
2. Press the
buttons to adjust the settings of the selected menu:
/
The new setting starts flashing on the display. If you return to the previous
setting, the flashing stops.
Important:
New settings become effective immediately and will be
retained in memory on turn-off!
N.B.: When changing transmitter frequencies, care should be
taken to avoid causing interference to other channels/users.
In the "tunE" and
"Ch
no" menu, the
function. If you briefly press the
or backwards to the next setting. If you press and hold down a button,
you can scroll through the settings.
3. Press the
SET
button to return to the top menu level:
Have you finished your entries? Press the
menu level. The display then switches back to the standard setting.
SET
buttons to switch between the factory-
/
SET
buttons feature a "fast search"
/
buttons, you can jump either forwards
/
SET
button to return to the top
and
and
button to
59
Advertisement
Table of Contents
