Warranty Information - Rockford Fosgate T110D2 Installation & Operation Manual

Subject: Sound quality on Punch P3 and Power T1 woofers
• BULLETIN NOTES
SERVICE ADVISORY
Complaints have come to our attention of Punch P3 and Power T1 woofers that do not sound "good" in various applications.
In our investigation into this complaint we have uncovered an installation related problem.
In some cases this is caused because the gaskets supplied have not been installed on the woofer before mounting it in the box.
Also, some woofers are being installed with screws, (drywall or simular type screws), other than those supplied.
Solution: When installing these woofers, insure the gaskets have been installed on the woofer basket before mounting the
woofer in place. Also ensure the supplied mounting screws are used to secure the woofer.This will ensure an air-tight seal when
the woofer is installed. See figure 1 below.
• APPLICABLE MODEL(S)
Punch P3 and Power T1 Woofers
• PART(S) INFORMATION
• DESCRIPTION
• REPAIR PROCEDURE
See Above

• WARRANTY INFORMATION

N/A
06/05 B.M.
Brand: Rockford Fosgate - Punch P3 and Power T1
Bulletin No.: SrvAdvise-03
Date Issued: June, 2005
Gaskets
figure 1
Mounting
Screws
SrvAdvise-03