Do you have a question about the PWMA1050 and is the answer not in the manual?
Questions and answers
Michael Hari
March 13, 2025
PWMA1050BT Portable system: while using, which line to create a Monitor speaker Passive or active on stage. I have two other Pyle mixers too. Easy and best method.
1 comments:
Mr. Anderson
March 13, 2025
The Pyle PWMA1050BT is a portable PA system with built-in amplification. To connect a monitor speaker, you can use either a passive or active (powered) speaker, depending on the available output options.
### 1. Using a Passive Monitor Speaker A passive speaker requires an amplified signal. Since the PWMA1050BT does not have a dedicated speaker output for passive monitors, you cannot directly connect a passive monitor speaker unless you use an external power amplifier.
Steps (if using an external amplifier): - Connect the LINE OUT or REC OUT (if available) from the PWMA1050BT to the input of an external power amplifier using a suitable cable (RCA or 1/4" depending on the output). - Connect the amplifier’s speaker output to the passive monitor speaker using speaker cables. - Adjust the amplifier’s volume to match the PA system.
### 2. Using an Active (Powered) Monitor Speaker An active speaker has a built-in amplifier and can receive a line-level signal directly.
Steps: - Locate the LINE OUT or REC OUT on the PWMA1050BT. - Use an RCA-to-RCA or RCA-to-1/4" cable to connect the LINE OUT of the PWMA1050BT to the input of the active monitor speaker. - Power on the active speaker and adjust its volume as needed.
Using an active speaker is the simplest method since it does not require an additional amplifier.
800 watt dual channel wireless rechargeable portable pa system with ipod/iphone dock, fm/usb/sd, handheld microphone, and lavalier/headset microphone (4 pages)
600 watt battery powered portable bluetooth battery powered pa speaker system w/ usb/sd, fm radio, 3.5mm aux input, one wireless microphone and disco lights (5 pages)
400w portable pa speaker system w/flashing lights, usb/sd readers, fm radio, 3.5mm input, microphone inputs, vhf wireless microphone, battery powered and disco lights (6 pages)
Need help?
Do you have a question about the PWMA1050 and is the answer not in the manual?
Questions and answers
PWMA1050BT Portable system: while using, which line to create a Monitor speaker Passive or active on stage. I have two other Pyle mixers too. Easy and best method.
The Pyle PWMA1050BT is a portable PA system with built-in amplification. To connect a monitor speaker, you can use either a passive or active (powered) speaker, depending on the available output options.
### 1. Using a Passive Monitor Speaker
A passive speaker requires an amplified signal. Since the PWMA1050BT does not have a dedicated speaker output for passive monitors, you cannot directly connect a passive monitor speaker unless you use an external power amplifier.
Steps (if using an external amplifier):
- Connect the LINE OUT or REC OUT (if available) from the PWMA1050BT to the input of an external power amplifier using a suitable cable (RCA or 1/4" depending on the output).
- Connect the amplifier’s speaker output to the passive monitor speaker using speaker cables.
- Adjust the amplifier’s volume to match the PA system.
### 2. Using an Active (Powered) Monitor Speaker
An active speaker has a built-in amplifier and can receive a line-level signal directly.
Steps:
- Locate the LINE OUT or REC OUT on the PWMA1050BT.
- Use an RCA-to-RCA or RCA-to-1/4" cable to connect the LINE OUT of the PWMA1050BT to the input of the active monitor speaker.
- Power on the active speaker and adjust its volume as needed.
Using an active speaker is the simplest method since it does not require an additional amplifier.
This answer is automatically generated