Searching An Input Signal - Dukane 8755N Operating Manual

Selecting an input signal(continued)
1.
Press the MY SOURCE / DOC. CAMERA button on
the remote control. The input signal will be changed
into the signal you set as MY SOURCE (59).
● This function also can use for document camera. Select the
input port that connected the document camera.

Searching an input signal

1.
Press SEARCH button on the remote control.
The projector will start to check its input ports as below in
order to fi nd any input signals.
When input signal is detected, the projector will stop
searching and display the image. If no signal is found,
the projector will return to the state selected before the
operation.
COMPUTER IN1  COMPUTER IN2  LAN
VIDEO
S-VIDEO
● While ON is selected for AUTO SEARCH item in OPTION menu (56), the
projector will keep checking the ports in above order repeatedly till an input
signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.
HDMI
MY SOURCE /
DOC. CAMERA button
SEARCH button
USB TYPE A
USB TYPE B
Operating
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH BLANK
FREEZE
MAGNIFY PAGE VOLUME
UP
ON
＋
DOWN
OFF
ー
MY BUTTON
KEYSTONE MUTE
2
1
MENU
POSITION
ENTER
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH
BLANK
ESC RESET
MAGNIFY FREEZE PAGE VOLUME
UP
ON
＋
OFF DOWN
ー
MY BUTTON
KEYSTONE MUTE
1 2
POSITION MENU
ENTER
ESC RESET
25