Selecting An Input Signal - Dukane 8755N Operating Manual

Operating

Selecting an input signal

1.
Press INPUT button on the projector.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1  COMPUTER IN2  LAN
VIDEO
S-VIDEO
● While ON is selected for AUTO SEARCH item in OPTION menu (56), the
projector will keep checking the ports in above order repeatedly till an input
signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.
1.
Press COMPUTER button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1  COMPUTER IN2  LAN
USB TYPE B
● While ON is selected for AUTO SEARCH item in OPTION menu, the
projector will keep checking every port sequentially till an input signal is detected
(56). If COMPUTER button is pressed when VIDEO, S-VIDEO or HDMI port is
selected, the projector will check COMPUTER IN1 port fi rst.
● It may take several seconds to project the images from the USB TYPE B port.
1.
Press VIDEO button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
HDMI  S-VIDEO  VIDEO
● While ON is selected for AUTO SEARCH item in OPTION menu,
the projector will keep checking every port sequentially till an input signal
is detected (56). If VIDEO button is pressed when COMPUTER IN1,
COMPUTER IN2, LAN, USB TYPE A or USB TYPE B port is selected, the
projector will check HDMI port fi rst.
24
HDMI
USB TYPE A
USB TYPE A
USB TYPE B
COMPUTER button
INPUT
button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
FREEZE
MAGNIFY PAGE VOLUME
UP
ON
＋
DOWN
OFF
ー
MY BUTTON
MUTE
KEYSTONE
1 2
POSITION MENU
ENTER
ESC RESET
VIDEO button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO
SEARCH BLANK
FREEZE
MAGNIFY PAGE VOLUME
UP
ON
＋
OFF DOWN
ー
MY BUTTON
KEYSTONE MUTE
1 2
POSITION MENU
ENTER
ESC RESET