Bluetooth Pairing; Remote Control - Lightning Audio LA-1500BT Owner's Manual

Bluetooth TM Pairing
1. Pairing
Turn on the Bluetooth mode of your mobile phone, then select the function for
Finding Bluetooth Device. After finding, it will show the name of Bluetooth
Device "LIGHTNING AUDIO"; once found, select it and then it will asks you to input
a password/PIN. Input "0000" , then the LCD of the car audio system will display
CONNECT.
2. Disconnection
A) Using the mobile phone to disconnect
1) When connected, find the paired Bluetooth device, then press the
disconnection button to disconnect.
B) When turning the unit on (after Acc of the car was switched off ), the unit will
search for a mobile phone, pair and connect. This will take about 10-15 seconds.
Note: When connected, the mobile phone transfers to the car audio player whenever
dialling takes place; the mobile phone transfers to the car audio player whenever
receiving a call.
3. Dialing options when connected
A) Dial with mobile phone directly.
B) To dial with remote control use the following procedures:
1) Briefly press SEND button.
2) Input telephone number with number buttons 0-9.
3) Briefly press END button to cancel the incorrectly entered number, if necessary.
4) Briefly press SEND to start dialing. The talking time will appear on LCD if
dialling is successful and is received.
C) Redial - Press SEND button on remote control twice, it will show DIALING on
LCD and dial the number. After dialing is completed, talk time will display.
4. Accept/ Reject/ End Call
A) To accept the call, press the SEND button.
B) To reject the call, press the END button.
C) To end the call, press the END button.
Note: When call is ringing, CALLING appears along with then the phone number.
While talking, talk time appears.
5. Talking volume level setting
While talking, use volume control to adjust volume level. This volume level can
not be saved.
6. To transfer the audio of a file played by the Mobile Phone to the Car
Audio Player
If the mobile phone supports A2DP and is capable of playing audio files; when
the Mobile Phone plays an audio file, the playback will be transferred to the Car
Audio Player (For some Mobile Phones, you must first select Play by Bluetooth).
In A2DP mode, if the Bluetooth device of the Mobile Phone supports AVRCP, the
functions of the >>|, |<< and PLAY/PAUSE buttons are the same as in media mode
(no fast forward/backward functions for the >>|/|<< buttons). The other buttons
normally available in media mode are not available.
Android App (LA-1500BT & LA-2300BT)
Another way to control the unit instead of using the included remote, you can use
your Android phone. You will need to install the "RadioView" app onto your mobile
device. The app will need to be downloaded from Google Play. Do a search for
"RadioView" and proceed to download. Install per the app instructions.

Remote Control

POWER
POWER button
A.P (Auto Program)
AP
button
SCN (Scan) button
SCN
CLK (Clock) button
BND (Band) button
MODE button
MODE
TOP
1
PLAY/PAUSE button
INT (Intro) button
5
" " button *
*
MUTE
MUTE button
T-M button
Load/unloading battery of remote control
Fig. 1
1.
Please remove insulating sheet out of remote control before use. Pull out
insulating sheet in the direction as per Fig. 1.
2.
When changing battery for remote control, first pull the movable block hold in
the direction as indicated in Fig. 2, Arrow A. Then pull the battery holder out
from the remote control in the direction as indicated in Fig.2, Arrow B.
3.
Replace the old battery by a new battery with (+) polarity side upward. Then
return the battery holder to the remote control by pressing the battery holder.
Please see Fig.3.
Do not short the battery.
Do not throw the battery into the fire.
To avoid the risk of accident, keep the battery out of reach of children.
10
+
-
/ button
SEL (Select) button
UP DN
FWD/BACK, UP/DOWN button
SEL
AF (Alt. Freq.) button
CLK AF
PTY (Program Type) button
TA (Traffic Announcement) button
BND PTY TA
INT RPT RDM
2 3 4
RDM (Random) button
RPT (Repeat) button
6 7 8
NUMBER buttons
9 0
" " button
#
#
Call SEND button
T-M
Call END button
B
A
Fig. 2 Fig. 3
Improper use of battery may cause overheating or
explosion. Which may result injury or fire.
Battery leakage may cause damage to the remote
control(Battery Life: 6 months with normal use in
normal room temperature).
+ Side Up